Hi Salaque
I installed dahdi in my asterisk but I didn't connect the cable between E1 port to MUX yet.
I am getting following output by the command : cat /proc/dahdi/1
1 TE4/0/1/1 Clear (In use) RED
2 TE4/0/1/2 Clear (In use) RED
3 TE4/0/1/3 Clear (In use) RED
4 TE4/0/1/4 Clear (In use) RED
and my Asterisk CLI output is:
NSSS*CLI> dahdi show status
Description Alarms IRQ bpviol CRC4 Fra Codi Options LBO
T4XXP (PCI) Card 0 Span 1 RED 0 0 0 CCS HDB3 YEL 0 db (CSU)/0-133 feet (DSX-1)
T4XXP (PCI) Card 0 Span 2 RED 0 0 0 CCS HDB3 YEL 0 db (CSU)/0-133 feet (DSX-1)
T4XXP (PCI) Card 0 Span 3 RED 0 0 0 CCS HDB3 YEL 0 db (CSU)/0-133 feet (DSX-1)
T4XXP (PCI) Card 0 Span 4 RED 0 0 0 CCS HDB3 YEL 0 db (CSU)/0-133 feet (DSX-1)
T4XXP (PCI) Card 1 Span 1 RED 0 0 0 CCS HDB3 YEL 0 db (CSU)/0-133 feet (DSX-1)
T4XXP (PCI) Card 1 Span 2 RED 0 0 0 CCS HDB3 YEL 0 db (CSU)/0-133 feet (DSX-1)
T4XXP (PCI) Card 1 Span 3 RED 0 0 0 CCS HDB3 YEL 0 db (CSU)/0-133 feet (DSX-1)
T4XXP (PCI) Card 1 Span 4 RED 0 0 0 CCS HDB3 YEL 0 db (CSU)/0-133 feet (DSX-1)
............
Meant the dahdi configuration is okay or not??
Shuvro
________________________________
From: Mohammad Salaque <msalaque@xxxxxxxxx>
To: asterisk-ss7 at lists.digium.com
Sent: Wednesday, September 30, 2009 6:57:07 PM
Subject: Re: config.c:778 load_config_host: Connector no. 1 specified twice for host 'linux6.'
have you resolved that problem ? I faced the same, replaced hostname
with FQDM after that all ok now.
Thanks
----------------------------
M. Salaque
On Tue, Sep 29, 2009 at 3:15 AM, Tusar <tusarbd at gmail.com> wrote:
> Hi,
>
> links => l1:1
> links => l1:1,l2:2,l3:3,l4:4
>
> "links" are 2 times. It should be 1 time .
>
> Regards,
> //Tusar\\
>
>
> On Mon, Sep 28, 2009 at 7:03 PM, qiaoqiao7036 <qiaoqiao7036 at gmail.com>
> wrote:
>>
>> Dear all,
>>
>> We are using following Software/Hardware.
>> 1.asterisk-1.4.20
>> 2.zaptel-1.4.10
>> 3.chan_ss7-1.1
>>
>> my ss7.conf like this:
>> ===========================
>> [linkset-ls1]
>> enabled => yes
>> enable_st => yes
>> use_connect => no
>> hunting_policy => even_mru
>> context => ss7_call
>> language => en
>> subservice => auto
>> variant => CHINA
>> [link-l1]
>> linkset => ls1
>> channels => 1-15,17-31
>> schannel => 16
>> firstcic => 1
>> enabled => yes
>>
>> echocancel => no
>> echocan_train => 350
>> echocan_taps => 128
>>
>> [link-l2]
>> linkset => ls1
>> channels => 1-31
>> schannel =>
>> firstcic => 33
>> enabled => yes
>>
>> [link-l3]
>> linkset => ls1
>> channels => 1-31
>> schannel =>
>> firstcic => 65
>> enabled => yes
>>
>> [link-l4]
>> linkset => ls1
>> channels => 1-31
>> schannel =>
>> firstcic => 97
>> enabled => yes
>>
>> [host-linux6]
>> enabled => yes
>> opc => 0x222222
>> dpc => ls1:0x298922
>> links => l1:1
>> links => l1:1,l2:2,l3:3,l4:4
>>
>> when i run the command "asterisk -vvvvvvvvvgc", there was a error:
>>
>> config.c:778 load_config_host: Connector no. 1 specified twice for host
>> 'linux6.'
>>
>> my hostname is also linux6, is there anybody can tell me the reason?
>>
>> Thanks
>>
>>
>>
>>
>>
>>
>>
>> Reagards
>> Denins.Den
>>
>> 2009-09-28
>> ________________________________
>> qiaoqiao7036
>> _______________________________________________
>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>
>> asterisk-ss7 mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20090930/8a3da711/attachment.htm
|