Are you using libss7 ?? From: asterisk-ss7-bounces@xxxxxxxxxxxxxxxx [mailto:asterisk-ss7-bounces at lists.digium.com] On Behalf Of Pablo Molina roman Sent: June-12-09 6:42 PM To: asterisk-ss7 at lists.digium.com Subject: Modify Screening Hello Guys I need modify Screening: parameter to value 3, right now i have Screening: 0 , but i don?t know where i can modify. I have Asterisk 1.6.0.9 Dahdi and Sangoma Card. The calls work really good but my provider can't pass the CLI or ANI to the other side because need the Screening parameter on value 3 and I send on 0, here my chan_dahdi.conf [channels] signalling=ss7 ss7type=itu ;ss7_called_nai=unknown ss7_called_nai=dynamic ss7_calling_nai=dynamic context=from-pstn ;switchtype=euroisdn usecallerid=yes cidsignalling=dtmf hidecallerid=no restrictcid=yes callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no linkset=1 networkindicator=national ;networkindicator=national_spare pridialplan=international pointcode = 9640 adjpointcode = 9270 defaultdpc = 9264 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20090612/3d83e186/attachment.htm
|