Wrong. Asterisk will not function as a pure converter. All calls will need to be switched, so if you intend on having 8 E1 coming from the EWSD, you will need 16 E1 on Asterisk. That is doable using 2x8 E1 PCI xpress cards, or a 4 PCI slot motherboard and 4 quad PCI E1 cards. You'll need to disable echo canceling to avoid running out of cpu. And it will depend on the volume of call setups. Your mileage will vary. An EWSD should be able to do EuroISDN anyways... Marcelo Joseph wrote: > On Jan 24, 2009, at 4:10 AM, Balgansuren Batsukh wrote: > > > Hello, > > > Is it possible to Asterisk + libss7 + libpri as signaling gateway/ > > converter only? > > > I would like to run following scenario: > > > Alcatel E10/Siemens EWSD---------ITU C7------->Asterisk---- > > EuroISDN----->Cisco AS5300/Sysmaster SM7000 > > > Yes, this should work fine. > > You just need to setup your hardware and configure it appropriately. > _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-ss7 mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-ss7
|