The easiest way to do this is to use libss7 + dahdi's native ss7 support, unless you want to look at all those repeated FISUs and LSSUs. Also this way you don't need to perform HDLC decoding, each MTP2 message comes as a single read/recv. Satish Chandra wrote: > Hi All, > > I am trying to develop a Tapping device that can be used in a SS7 > network. I am not able decide on a particular channel type which I > should configure in zaptel.conf. The device needs to sit on a SS7 > (T1/E1) link. As I will be duplicating signal using a tapping > (Y-shaped) wire, I need not to send any signal from the device. So, in > a way the device will just receive signals and will not transmit any. > > I read about mtp2 channel type in one of the article but was not able > to find any documentation for its configuration in zaptel.conf > > I need suggestions whether I should use this channel type for this > scenario or some other. > > Kinldy tell me how to configure. > > -- > Thanks Regards, > Satish Chandra > ------------------------------------------------------------------------ > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7
|