" These are messages from the switch: Msg:(E_SS7SS_MTP3_SLTM_FAILED) - SLTM failed. [Link : 160, OPC : 0x3e8, DPC : 0x708], Cause: SLTA_NOT_RECVD Msg:(E_SS7SS_MTP3_SLTM_FAILED) - SLTM failed. [Link : 160, OPC : 0x3e8, DPC : 0x708], Cause: SLTA_NOT_RECVD Msg:(IPCC_LOG_ERR) - MTP3:: DISC: INVALID POINTCODES IN INCOMING MESSAGE WITH LPC 0x708,RPC 0x3e8. DISCARDING..." Hi, Is this message from the operator's switch ? Please tell me what's the pointcode of the operator's switch ? Just to verify that you did not cross the PCs (set the operators PC as yours and vice-versa); regards, 2R Florian Smeets a ?crit : > On 1/27/09 6:12 PM, Matthew Fredrickson wrote: > >> Florian Smeets wrote: >> >>> Hi >>> >>> i'm trying to connect a Motorola MSC to asterisk-1.6.1-beta4 + libss7 trunk. >>> >>> I'm using FreeBSD and dahdi-bsd, i know this is not supported and so on, >>> but it almost works, and i would like to get it to work completely :-) >>> >>> > > Sorry for following up so late, but i was finally able to gather the > requested information. > > >> Well, this is a random thought, but perhaps in the FreeBSD port, we are >> not able to send out FISUs quick enough... What does your FreeBSD >> equivalent of /etc/dahdi/system.conf have in it? >> > > span=1,1,0,ccs,hdb3 > span=2,1,0,ccs,hdb3 > span=3,1,0,ccs,hdb3 > span=4,1,0,ccs,hdb3 > bchan=1-15,17-31 > mtp2=16 > loadzone = de > defaultzone=de > > >> The real thing that would tell us a lot is to ask the switch at the >> other end why it's dropping the link. >> >> > > These are messages from the switch: > > Msg:(E_SS7SS_MTP3_SLTM_FAILED) - SLTM failed. [Link : 160, OPC : 0x3e8, > DPC : 0x708], Cause: SLTA_NOT_RECVD > Msg:(E_SS7SS_MTP3_SLTM_FAILED) - SLTM failed. [Link : 160, OPC : 0x3e8, > DPC : 0x708], Cause: SLTA_NOT_RECVD > Msg:(IPCC_LOG_ERR) - MTP3:: DISC: INVALID POINTCODES IN INCOMING MESSAGE > WITH LPC 0x708,RPC 0x3e8. DISCARDING... > > It seems that SLTMs are not answered correctly?! And the last message is > IMHO very confusing... > > >> So far, it looks like all the messages are good, point codes are >> correct, etc. >> >> > > Cheers, > Florian > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > >
|