Hi, It works !!! Thank you very much to all of you . I really appreciate your helps . Best Regards, //Tusar\\ On Wed, Dec 9, 2009 at 7:08 PM, Antoine Megalla <aatef at rocketmail.com>wrote: > Hi, > > I asked about the same issue back in July, and I was able to create the > configuration file for such setting on 2 Asterisk boxes. > Basically you are going to use the same ss7.conf file in both servers, > while running the mtp3d daemon in the server that has the E1 with the > signaling link. > > so if you have the signaling link in the 1st E1 of host1, then the > following is all you need to make it work: > schannel => 16,host1:12000 > (where your mtp3d is running on host1 and listening on port 12000) > > I was only able to test it using just 2 E1s, one in each server and it > worked, so nothing should stop it from working on 8 E1s with 4 in each > server. > > Here is what it should look like: > > >> [linkset-MSC1] > >> enabled => yes > >> enable_st => no > >> use_connect => yes > >> hunting_policy => seq_htl > >> subservice => auto > > >> context => ss7 > >> language => en > >> t35 => 15000,timeout > >> > >> [link-l1] > >> linkset => MSC1 > >> channels => 1-15,17-31 > >> schannel => 16,host1:12000 > > >> firstcic => 1 > >> echocancel => no > >> echocan_train => 350 > >> echocan_taps => 128 > >> enabled => yes > >> > >> [link-l2] > >> linkset => MSC1 > > >> channels => > 1-31 > >> schannel => > >> firstcic => 33 > >> echocancel=allways > >> echocan_taps=32 > >> echocan_train=350 > >> enabled => yes > >> > >> [link-l3] > >> linkset => MSC1 > > >> channels => 1-31 > >> schannel => > >> firstcic => 65 > >> echocancel=no > >> echocan_taps=32 > >> echocan_train=350 > >> enabled => yes > >> > >> [link-l4] > > >> linkset => MSC1 > >> channels => 1-31 > >> schannel => > >> firstcic => 97 > >> echocancel=no > >> echocan_taps=32 > >> echocan_train=350 > >> enabled => yes > > >> > >> [link-l5] > >> linkset => MSC1 > >> channels => 1-31 > >> schannel => > >> firstcic => 129 > >> echocancel=no > >> echocan_taps=32 > >> echocan_train=350 > > >> > enabled => yes > >> > >> [link-l6] > >> linkset => MSC1 > >> channels => 1-31 > >> schannel => > >> firstcic => 161 > >> echocancel=no > >> echocan_taps=32 > > >> echocan_train=350 > >> enabled => yes > >> > >> [link-l7] > >> linkset => MSC1 > >> channels => 1-31 > >> schannel => > >> firstcic => 193 > >> echocancel=no > > >> echocan_taps=32 > >> echocan_train=350 > >> enabled => yes > >> > >> [link-l8] > >> linkset => MSC1 > >> channels => 1-31 > >> schannel => > >> firstcic => 225 > > >> echocancel=no > >> echocan_taps=32 > >> echocan_train=350 > >> enabled => yes > >> > >> [host-host1] > >> enabled => yes > >> default_linkset => MSC1 > >> opc => > 1000 > >> dpc => MSC1:2000 > >> links => l1:1,l2:2,l3:3,l4:4 > >> if-1 => 10.0.0.1 > >> > >> [host-host2] > >> enabled => yes > >> default_linkset => MSC1 > > >> opc => 1000 > >> dpc => MSC1:2000 > >> links => l5:1,l6:2,l7:3,l8:4 > >> if-1 => 10.0.0.2 > > > Regards, > > Antoine Megalla > www.sandcti.com > > ------------------------------ > *From:* Tusar <tusarbd at gmail.com> > *To:* asterisk-ss7 at lists.digium.com > *Sent:* Wed, December 9, 2009 7:36:03 AM > *Subject:* [asterisk-ss7] chan_ss7 :: Single signaling link across > Multiple Asterisk Boxes > > Hi, > > I am trying to work with (4+4) 8 E1s will have to share 1 signaling link > on the first E1 with one point code with 2 separate asterisk box. Where 2nd > asterisk box will share the signaling link of the 1st asterisk box . > > I looked for such a setup on the list and all over the Internet but with no > success. Is there any working example ss7.conf file for this purpose ? > > Thanks and best regards, > > //Tusar\\ > > > > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20091210/2fd58e92/attachment.htm
|