Hi all, i am trying to setup asterisk with chan_dahdi ss7 support on the latest trixbox... I do have no digium cards in the box - using sangoma cards - the wanpipe modules are already loaded and working... When i try to load chan_dahdi.so - then the module does not get loaded - and i will get an error message "chan_dahdi.c: Unable to open SS7 sigchan 16 (Device or resource busy)" i do have the following configs wanpipe1.conf [devices] wanpipe1 = WAN_AFT_TE1, Comment [interfaces] w1g1 = wanpipe1, , TDM_VOICE, Comment [wanpipe1] CARD_TYPE = AFT S514CPU = A CommPort = PRI AUTO_PCISLOT = NO PCISLOT = 4 PCIBUS = 6 FE_MEDIA = E1 FE_LCODE = HDB3 FE_FRAME = CRC4 FE_LINE = 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_SIG_MODE = CCS TE_HIGHIMPEDANCE = NO TE_RX_SLEVEL = 430 LBO = 120OH FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 16 TDMV_HW_DTMF = NO TDMV_HW_FAX_DETECT = NO [w1g1] ACTIVE_CH = ALL TDMV_HWEC = NO MTU = 8 dahdi/system.conf span=1,1,0,ccs,hdb3 mtp2=16 bchan=1-15 bchan=17-31 chan_dahdi.conf [channels] signalling = ss7 ss7type = itu linkset = 1 pointcode = 9100 adjpointcode = 993 defaultdpc = 993 sigchan = 16 cicbeginswith = 1 ss7_called_nai=dynamic ss7_calling_nai=dynamic ss7_internationalprefix = 00 ss7_nationalprefix = 0 ss7_subscriberprefix = ss7_unknownprefix = networkindicator=international channel=1-15 channel=17-31 I have already tried all possible combinations of not specifiying dchan on wanpipe - only later, and so on - no luck with it... Anyone here who knows what could get wrong ? best regards, Wolfgang -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20091208/e8d57e14/attachment.htm
|