Ok, found out how to disable notice log entries. But I can't get my two * boxes with chan_ss7 to connect (or rather there seems to be no available ss7 channel), the card channels seem to be in a reset state: *CLI> ss7 linestat Linkset: siuc> CIC 1 Idle Reset pending CIC 2 Idle Reset pending [..snip..] CIC 28 Idle Reset pending CIC 29 Idle Reset pending CIC 30 Idle Reset pending CIC 31 Idle Reset pending The HW is Digium Wildcard TE121, dahdi_scan shows: [1] active=yes alarms=OK description=Wildcard TE121 Card 0 name=WCT1/0 manufacturer=Digium devicetype=Wildcard TE121 location=PCI Bus 08 Slot 09 basechan=1 totchans=31 irq=16 type=digital-E1 syncsrc=1 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=HDB3 framing_opts=CCS,CRC4 coding=HDB3 framing=CCS Link status is: *CLI> ss7 link status linkset siuc, link l1, schannel 16, sls 0, NOT_ALIGNED, rx: 0, tx: 1/4, sentseq/lastack: 127/127, total 0, 2455632 dahdi_channels.conf says: span=1,X,0,ccs,hdb3 (X=1 on machine 1, X=0 on machine 2) bchan=1-31 Ideas? TIA /Rob
|