Hi,
So I wrote 1 ss7.conf for both servers as suggested, I just need comments if the file looks correct, or if it missing anything:
Do I need a [cluster] section in the file:
Here is?my ss7.conf file:
[linkset-MSC1]
enabled => yes
enable_st => no
use_connect => yes
hunting_policy => seq_htl
subservice => auto
context => ss7
language => en
t35 => 15000,timeout
[link-l1]
linkset => MSC1
channels => 1-15,17-31
schannel => 16,host1:12000
firstcic => 1
echocancel => no
echocan_train => 350
echocan_taps => 128
enabled => yes
[link-l2]
linkset => MSC1
channels => 1-31
schannel =>
firstcic => 33
echocancel=allways
echocan_taps=32
echocan_train=350
enabled => yes
[link-l3]
linkset => MSC1
channels => 1-31
schannel =>
firstcic => 65
echocancel=no
echocan_taps=32
echocan_train=350
enabled => yes
[link-l4]
linkset => MSC1
channels => 1-31
schannel =>
firstcic => 97
echocancel=no
echocan_taps=32
echocan_train=350
enabled => yes
[link-l5]
linkset => MSC1
channels => 1-31
schannel =>
firstcic => 129
echocancel=no
echocan_taps=32
echocan_train=350
enabled => yes
[link-l6]
linkset => MSC1
channels => 1-31
schannel =>
firstcic => 161
echocancel=no
echocan_taps=32
echocan_train=350
enabled => yes
[link-l7]
linkset => MSC1
channels => 1-31
schannel =>
firstcic => 193
echocancel=no
echocan_taps=32
echocan_train=350
enabled => yes
[link-l8]
linkset => MSC1
channels => 1-31
schannel =>
firstcic => 225
echocancel=no
echocan_taps=32
echocan_train=350
enabled => yes
[host-host1]
enabled => yes
default_linkset => MSC1
opc => 1000
dpc => MSC1:2000
links => l1:1,l2:2,l3:3,l4:4
if-1 => 10.0.0.1
[host-host2]
enabled => yes
default_linkset => MSC1
opc => 1000
dpc => MSC1:2000
links => l5:1,l6:2,l7:3,l8:4
if-1 => 10.0.0.2
Appreciate your comments,
Regards,
Antoine Megalla.
?
----- Original Message ----
From: Anders Baekgaard <ab@xxxxxxxx>
To: asterisk-ss7 at lists.digium.com
Sent: Thursday, April 2, 2009 12:03:57 PM
Subject: Re: chan_ss7 signalling across multiple servers
Assuming link 'l1' has signaling on ts 16, and this is connected on server
'host1', you will write
[link-l1]
...
schannel => 16, host1:12000
...
You must specify this on both servers. It is easiest to have the same
configuration specification (ss7.conf) on both servers. chan_ss7 will forward
signaling using TCP/IP to 'host1', port 12000, so you must ensure mtp3d is
running on that server.
Best regards,
--
Anders Baekgaard
Managing Director, Dicea ApS
Esromgade 15, 1110
DK-2200 Copenhagen N
Denmark
Tel: +45 46931411
Fax: +45 46931466
Mobile: +45 20771844
On Wednesday 01 April 2009 17:07:57 Antoine Megalla wrote:
> Hi,
>?
> I am trying to use chan_ss7 in an 8 E1s setup.
> All E1s will have to share 1 signalling channel on the first E1 and one
> point code of course.
> The 8 E1s will be split on 2 servers, each server with 4 E1s (TE405 Digium
> card) I know that chan_ss7 supports this kind of setup using the mtp3d
> service, but I cannot find a single example of ss7.conf files to do that.
> I looked for such a setup on the list and all over the Internet but with no
> success. I need to know how the ss7.conf file will look like on the server
> with the signalling channel and also what ss7.conf should contain on the
> server that has the other E1s with no signalling channel.
> Thank you and best regards,
>?
> Antoine Megalla.
>
>
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
>? ? http://lists.digium.com/mailman/listinfo/asterisk-ss7
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
? http://lists.digium.com/mailman/listinfo/asterisk-ss7
|