Hi... Ok Matt...but explain me if i do a "vi /var/log/asterisk/messages" ....i see chan_dahdi.c : Detected Alarm on Channel 1 : Red Alarm ...this continues till Channel 31 ...Are you still sure that its a problem from operator end cos last time when i posted the message : -------------------------------------------------------------------------------- Sriram wrote: > Thanks ! now chan_dahdi.so was seen under the modules of asterisk..but > another prob :( whenver i get to asterisk CLI and give the module load > chan_dahdi.so ...it exits with the following error : > > Unable to load chan_dahdi.so , command 'module load chan_dahdi.so' > failed...the debug msg shows : > > [sep 14 03:52:06] WARNING[30185]:chan_dahdi.c:4290 > handle_alarms:Detected alarm on channel 1:Red Alarm --registered channel > 1, ss7 signalling > > i see this till channel 15 after which it exits saying cant set sigchan > on channel 16....the operator is still doing some chnages at his end but > i just want to confirm if this is some issue at his end or my end > > thanks- sriram That is an issue with your end. Make sure you signalling is set to either mtp2 (if it's a Digium card) or dchan if it's not in /etc/dahdi/system.conf. Matthew Fredrickson --------------------------------------------------------------------------------you replied as above but at that time i wasnt getting chan_dahdi.so to load which is not the case this time around...Please confirm so that i ask the operatorand tell him that i dont get SIO or SIOS messagesthnks a tonSriram -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20080916/6354d2de/attachment.htm
|