Hello, i have 2 pointcodes routed to adjacent PC with the same CICs numbers in one linkset. when i use command: Usage: ss7 block cic <linkset> <CIC> it will block me 2 cics :-( linkset = 1 ; Pick a number for your linkset identifier in zapata.conf pointcode = xxx1 ; The decimal form of your point code. If you are using an adjpointcode = xxx6 ; The point code of the switch adjacent to your linkset defaultdpc = xxx6 ; The point code of the switch you want to send your ISUP cicbeginswith = 2 ; Number to start counting the CICs from. So if Zap/1 to sigchan = 1 ; This is where you declare which Zap channel is your signalling group = 1 channel=2-31 ; Use Zap/1-15 and assign them to CICs 1-15 adjpointcode = xxx6 defaultdpc = xxx7 cicbeginswith=1 channel=125-155 -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/pkcs7-signature Size: 3505 bytes Desc: S/MIME Cryptographic Signature Url : http://lists.digium.com/pipermail/asterisk-ss7/attachments/20080916/9a0f879b/attachment.bin
|