My name is Ariel, I write from Buenos Aires Argentina, I'm configuring a platform for SS7 to by connected to PSTN ZTE model J10. I need your help, if you cant, take time to help me solving my problem. Asterisk 1.4.21 Zaptel 1.4 Chan-ss7 1.0.0 4E1 Digium The link this is in SERVICE, but de channel CIC, always are in: Idle Reset pending metross7*CLI> ss7 link status linkset metro, link i1, schannel 16, sls 0, INSERVICE, rx: 3, tx: 3/3, sentseq/lastack: 85/85, total 13626416, 13626512 metross7*CLI> ss7 linestat Linkset: metro CIC 1 Idle Reset pending CIC 2 Idle Reset pending CIC 3 Idle Reset pending CIC 4 Idle Reset pending CIC 5 Idle Reset pending CIC 6 Idle Reset pending CIC 7 Idle Reset pending metross7*CLI> ss7 mtp data [Sep 26 08:09:49] ERROR[4208]: mtp.c:870 mtp2_queue_msu: Got illegal MSU length 0 < 2, dropping frame on link 'i1'. metross7*CLI> EJ: ZAPTEL: #span=1,2,0,ccs,hdb3 # termtype: te bchan=1-15,17-31 #dchan=16 # Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2" span=2,1,0,ccs,hdb3 # termtype: te bchan=32-46,47-63 #dchan=47 Or If I configured Bchan= 1- 124 too Works it good. SS7. conf.: [linkset-metro] enabled => yes enable_st => no use_connect => no hunting_policy => seq_lth context => ss7 language => ar subservice => 8 [link-i1] linkset => metro channels => 1-15,17-31 schannel => 16 firstcic => 1 enabled => yes echocancel => allways ;echocan_train =>250 ;echocan_taps =>118 [host-metross7] enabled => yes opc => 4673 dpc => metro:4672 links => i1:2 ==>>> this is because the trunk [physical level] is connect to port 2 **************************************************************************** ************************************ The Central ZTE J10 had COD SLC 0 and 1, The cic became in 1 example: 1- 31, and the file confg.c of SS7 the cic is configured to start in 1. **************************************************************************** ************************************** If I send unblok of cic to PSTN to GW ss7, you cant view this message: [Sep 26 07:30:36] WARNING[3760]: l4isup.c:385 mtp_enqueue_isup_packet: MTP send fifo not ready. [Sep 26 07:30:51] NOTICE[3760]: l4isup.c:2275 handle_GRS_send_hwblock: Got GROUP RESET message, opc=0x1240, dpc=0x1241, sls=0x1, cic=1, range=9. [Sep 26 07:30:51] WARNING[3760]: l4isup.c:385 mtp_enqueue_isup_packet: MTP send fifo not ready. [Sep 26 07:31:14] WARNING[3760]: mtp.c:914 timeout_sltm_t1: No SLTA received within Q.707 timer T1, trying again on link 'i1'. [Sep 26 07:31:22] NOTICE[3760]: l4isup.c:2275 handle_GRS_send_hwblock: Got GROUP RESET message, opc=0x1240, dpc=0x1241, sls=0x1, cic=1, range=9. [Sep 26 07:31:22] WARNING[3760]: l4isup.c:385 mtp_enqueue_isup_packet: MTP send fifo not ready. [Sep 26 07:31:23] ERROR[3760]: mtp.c:919 timeout_sltm_t1: No SLTA received within Q.707 timer T1, faulting link on link 'i1'. [Sep 26 07:31:36] NOTICE[3760]: l4isup.c:2275 handle_GRS_send_hwblock: Got GROUP RESET message, opc=0x1240, dpc=0x1241, sls=0x1, cic=1, range=9. [Sep 26 07:31:36] WARNING[3760]: l4isup.c:385 mtp_enqueue_isup_packet: MTP send fifo not ready. ========================================================================= Connected to Asterisk 1.4.21.2 currently running on metross7 (pid = 22594) [Oct 10 11:49:35] WARNING[22609]: l4isup.c:1246 t23_timeout: T23 timeout (No "ci rcuit group reset acknowledge" from peer) CIC=1. [Oct 10 11:49:35] WARNING[22609]: l4isup.c:385 mtp_enqueue_isup_packet: MTP send fifo not ready [Oct 10 11:49:35] WARNING[22609]: l4isup.c:1246 t23_timeout: T23 timeout (No "ci rcuit group reset acknowledge" from peer) CIC=17. [Oct 10 11:49:35] WARNING[22609]: l4isup.c:385 mtp_enqueue_isup_packet: MTP send fifo not ready **************************************************************************** ************************************** metross7*CLI> ss7 mtp data [Oct 10 11:51:41] ERROR[22609]: mtp.c:870 mtp2_queue_msu: Got illegal MSU length 0 < 2, dropping frame on link 'i1'. metross7*CLI> **************************************************************************** *********************** What do you said about it Thank for you help. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20081014/c4bc8aa6/attachment.htm
|