Hi Mark! I had the same issue. Please check the timing source in zaptel.conf and then do the following: 1) Stop Asterisk 2) Unload Zaptel modules 3) Load Zaptel modules 4) Start Asterisk That solved it for me. Hope it helps. Best, On Wed, Oct 15, 2008 at 2:26 AM, mark morreny <markmorreny at gmail.com> wrote: > Hi, > > I am trying to get chan_ss7 working, but when everything is set up, I get > the following messages poping up: > > [Oct 15 12:18:41] WARNING[31634]: mtp.c:432 t2_timeout: MTP2 timer T2 > timeout (failed to receive 'O', 'N', or 'E' after sending 'O'), initial > alignment failed on link '11'. > [Oct 15 12:19:52] NOTICE[31634]: mtp.c:1539 mtp_thread_main: Excessive poll > delay 5390! (2/s) > [Oct 15 12:19:52] NOTICE[31634]: mtp.c:1598 mtp_thread_main: Full Zaptel > input buffer detected, incoming packets may have been lost on link '11'. > [Oct 15 12:19:52] NOTICE[31634]: mtp.c:1645 mtp_thread_main: Empty Zaptel > output buffer detected, outgoing packets may have been lost on link '11'. > [Oct 15 12:19:52] NOTICE[31634]: mtp.c:1598 mtp_thread_main: Full Zaptel > input buffer detected, incoming packets may have been lost on link '11'. > [Oct 15 12:19:52] NOTICE[31634]: mtp.c:1645 mtp_thread_main: Empty Zaptel > output buffer detected, outgoing packets may have been lost on link '11'. > [Oct 15 12:19:52] NOTICE[31634]: mtp.c:1598 mtp_thread_main: Full Zaptel > input buffer detected, incoming packets may have been lost on link '11'. > [Oct 15 12:19:52] NOTICE[31634]: mtp.c:1645 mtp_thread_main: Empty Zaptel > output buffer detected, outgoing packets may have been lost on link '11'. > [Oct 15 12:19:57] WARNING[31634]: mtp.c:432 t2_timeout: MTP2 timer T2 > timeout (failed to receive 'O', 'N', or 'E' after sending 'O'), initial > alignment failed on link '11'. > > localhost*CLI> ss7 show channels > Linkset: 1CLI> > CIC 1 Idle Reset pending > CIC 2 Idle Reset pending > CIC 3 Idle Reset pending > CIC 4 Idle Reset pending > CIC 5 Idle Reset pending > CIC 6 Idle Reset pending > CIC 7 Idle Reset pending > CIC 8 Idle Reset pending > CIC 9 Idle Reset pending > CIC 10 Idle Reset pending > CIC 11 Idle Reset pending > CIC 12 Idle Reset pending > CIC 13 Idle Reset pending > CIC 14 Idle Reset pending > CIC 15 Idle Reset pending > CIC 17 Idle Reset pending > CIC 18 Idle Reset pending > CIC 19 Idle Reset pending > CIC 20 Idle Reset pending > CIC 21 Idle Reset pending > CIC 22 Idle Reset pending > CIC 23 Idle Reset pending > CIC 24 Idle Reset pending > CIC 25 Idle Reset pending > CIC 26 Idle Reset pending > CIC 27 Idle Reset pending > CIC 28 Idle Reset pending > CIC 29 Idle Reset pending > CIC 30 Idle Reset pending > CIC 31 Idle Reset pending > Linkset: 2CLI> > CIC 32 Idle Reset pending > CIC 33 Idle Reset pending > CIC 34 Idle Reset pending > CIC 35 Idle Reset pending > CIC 36 Idle Reset pending > CIC 37 Idle Reset pending > CIC 38 Idle Reset pending > CIC 39 Idle Reset pending > CIC 40 Idle Reset pending > CIC 41 Idle Reset pending > CIC 42 Idle Reset pending > CIC 43 Idle Reset pending > CIC 44 Idle Reset pending > CIC 45 Idle Reset pending > CIC 46 Idle Reset pending > CIC 47 Idle Reset pending > CIC 48 Idle Reset pending > CIC 49 Idle Reset pending > CIC 50 Idle Reset pending > CIC 51 Idle Reset pending > CIC 52 Idle Reset pending > CIC 53 Idle Reset pending > CIC 54 Idle Reset pending > CIC 55 Idle Reset pending > CIC 56 Idle Reset pending > CIC 57 Idle Reset pending > CIC 58 Idle Reset pending > CIC 59 Idle Reset pending > CIC 60 Idle Reset pending > CIC 61 Idle Reset pending > CIC 62 Idle Reset pending > > > Could someone please help me out? Any idea what is wrong with my setup? > > Thanks alot for all your help. > > Mark > > > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > -- Facundo Ameal. fameal<at>gmail<dot>com Linux User #395088 Asterisk User #299 Share your knowledge, use free software.
|