Hi,
Thanx for the response. I unsuccessfully tried to remove the \# using
the CUT function. Next i used another box and installed chan_ss7-0.9.
Everything compiled fine however i get the following when I load
chan_ss7.so
trunk2*CLI> module load chan_ss7.so
[Mar 25 20:57:06] NOTICE[26833]: config.c:550 load_config_link:
Configured link 'l1' on linkset 'siuc', firstcic=1
[Mar 25 20:57:06] NOTICE[26833]: config.c:966 load_config: Configuring
DPC 11400 for linkset 'siuc'.
-- Starting cluster thread, pid=26796.
-- Starting continuity check thread, pid=26796.
[Mar 25 20:57:06] NOTICE[26833]: mtp.c:2200 mtp_init: Initialising 1
signalling links
-- Starting MTP thread, pid=26796.
-- SS7 channel loaded successfully.
-- Starting monitor thread, pid=26796.
[Mar 25 20:57:06] NOTICE[26837]: mtp.c:1802 mtp_thread_main: Empty
Zaptel output buffer detected, outgoing packets may have been lost on
link 'l1'.
trunk2*CLI> ss7 status
linkset idle busy initiating resetting total incoming total
outgoing
siuc 0 0 0 30
0 0
*** Idle list lenth is: 30
trunk2*CLI> ss7 link status
linkset siuc, link l1, schannel 16, sls 0, NOT_ALIGNED, rx: 7, tx:
4/4, sentseq/lastack: 127/127, total 287184, 287280
trunk2*CLI> ss7 linestat
Linkset: siuc
CIC 1 Idle Reset pending
CIC 2 Idle Reset pending
CIC 3 Idle Reset pending
CIC 4 Idle Reset pending
CIC 5 Idle Reset pending
CIC 6 Idle Reset pending
CIC 7 Idle Reset pending
CIC 8 Idle Reset pending
CIC 9 Idle Reset pending
CIC 10 Idle Reset pending
CIC 11 Idle Reset pending
CIC 12 Idle Reset pending
CIC 13 Idle Reset pending
CIC 14 Idle Reset pending
CIC 15 Idle Reset pending
CIC 17 Idle Reset pending
CIC 18 Idle Reset pending
CIC 19 Idle Reset pending
CIC 20 Idle Reset pending
CIC 21 Idle Reset pending
CIC 22 Idle Reset pending
CIC 23 Idle Reset pending
CIC 24 Idle Reset pending
CIC 25 Idle Reset pending
CIC 26 Idle Reset pending
CIC 27 Idle Reset pending
CIC 28 Idle Reset pending
CIC 29 Idle Reset pending
CIC 30 Idle Reset pending
CIC 31 Idle Reset pending
[Mar 25 20:58
On Mar 18, 2008, at 2:17 PM, asterisk at nicox.org wrote:
>
> Hi,
>
> I think i see the problem, try to filter any #* from the phone
> number and
> let it run.
>
> I'm using libss7 too, but i have only one problem, and on one
> machine i
> have about 40000 minutes a day.
>
> so, try it.
>
> nico
>
> On Tue, 18 Mar 2008, Markus A. Wipfler wrote:
>
>> Hi all,
>>
>> i am using libss7-trunk and asterisk-trunk to connect to a telecom
>> switch. I have been getting a lot of complaints from clients that
>> calls are not going through. My ASR is below 20%. When i analyze the
>> hangup causes, i find that more than 50% are Unknown:
>> Cause: Unknown (47)
>> Cause: Unknown (20)
>> Cause: Unknown (0)
>>
>> Below is a debug of a failed call, I highly appretiate any help.
>>
>>
>> --
>> Markus
>>
>>
>>
>> -- Accepting UNAUTHENTICATED call from IP.IP.IP.IP:
>>> requested format = ulaw,
>>> requested prefs = (ulaw|alaw|gsm),
>>> actual format = ulaw,
>>> host prefs = (ulaw|alaw|gsm),
>>> priority = mine
>> -- Executing [0752434592 at from-pbx:1] Set("IAX2/Trunk-GSM-9",
>> "CALLERPRES()=allowed") in new stack
>> -- Executing [0752434592 at from-pbx:2] Dial("IAX2/Trunk-GSM-9",
>> "Zap/g2/752434592") in new stack
>> trunk*CLI> -->XXX-->XXX entered opt params with pcount=1, x=5
>> Len = 37 [ e6 f6 22 c5 88 ec 98 10 01 00 01 00 60 01 0a 00 02 09 07
>> 03
>> 10 57 42 43 95 f2 0a 08 04 13 52 46 41 65 82 00 00 ]
>> FSN: 118 FIB 1
>> BSN: 102 BIB 1
>>> [0] MSU
>> [ e6 f6 22 ]
>> Network Indicator: 3 Priority: 0 User Part: ISUP (5)
>> [ c5 ]
>> OPC 611 DPC 11400 SLS 1
>> [ 88 ec 98 10 ]
>> CIC: 1
>> [ 01 00 ]
>> Message Type: IAM
>> [ 01 ]
>> --FIXED LENGTH PARMS[4]--
>> Nature of Connection Indicator:
>> Satellites in connection: 0
>> Continuity Check: Check not required (0)
>> Outgoing half echo control device: not
>> included (0)
>> [ 00 ]
>> Forward Call Indicators:
>> Nat/Intl Call Ind: call to be treated as a
>> national call (0)
>> End to End Method Ind: no end-to-end
>> method(s) available (0)
>> Interworking Ind: no interworking encountered
>> (0)
>> End to End Info Ind: no end-to-end
>> information available (0)
>> ISDN User Part Ind: ISDN user part used all
>> the way (1)
>> ISDN User Part Pref Ind: ISDN user part not
>> preferred all the way (1)
>> ISDN Access Ind: originating access ISDN (1)
>> SCCP Method Ind: no indication (0)
>> [ 60 01 ]
>> Calling Party Category:
>> Category: Ordinary calling subscriber (10)
>> [ 0a ]
>> Transmission Medium Requirements:
>> Speech (0)
>> [ 00 ]
>> --VARIABLE LENGTH PARMS[1]--
>> Called Party Number:
>> Nature of address: 3
>> NI: 0
>> Numbering plan: 1
>> Address signals: 752434592#
>> [ 07 03 10 57 42 43 95 f2 ]
>> --OPTIONAL PARMS--
>> Calling Party Number:
>> Nature of address: 4
>> NI: 0
>> Numbering plan: 1
>> Presentation: 0
>> Screening: 3
>> Address signals: 256414562800
>> [ 0a 08 04 13 52 46 41 65 82 00 ]
>>
>> -- Called g2/752434592
>> Len = 16 [ f6 e7 0d c5 63 02 22 1b 01 00 0c 02 00 02 82 af ]
>> FSN: 103 FIB 1
>> BSN: 118 BIB 1
>> <[0] MSU
>> [ f6 e7 0d ]
>> Network Indicator: 3 Priority: 0 User Part: ISUP (5)
>> [ c5 ]
>> OPC 11400 DPC 611 SLS 1
>> [ 63 02 22 1b ]
>> CIC: 1
>> [ 01 00 ]
>> Message Type: REL
>> [ 0c ]
>> --VARIABLE LENGTH PARMS[1]--
>> Cause Indicator:
>> Coding Standard: 0
>> Location: 2
>> Cause Class: 2
>> Cause Subclass: 15
>> Cause: Unknown (47)
>> [ 02 82 af ]
>>
>> -->XXX-->XXX entered opt params with pcount=1, x=0
>> Len = 12 [ e7 f7 09 c5 88 ec 98 10 01 00 10 00 ]
>> FSN: 119 FIB 1
>> BSN: 103 BIB 1
>>> [0] MSU
>> [ e7 f7 09 ]
>> Network Indicator: 3 Priority: 0 User Part: ISUP (5)
>> [ c5 ]
>> OPC 611 DPC 11400 SLS 1
>> [ 88 ec 98 10 ]
>> CIC: 1
>> [ 01 00 ]
>> Message Type: RLC
>> [ 10 ]
>>
>> [Mar 18 12:12:16] WARNING[1846]: app_dial.c:818 wait_for_answer:
>> Unable to forward voice or dtmf
>> -- Hungup 'Zap/1-1'
>> == Everyone is busy/congested at this time (1:0/0/1)
>> -- Auto fallthrough, channel 'IAX2/Trunk-GSM-9' status is
>> 'CHANUNAVAIL'
>> -- Hungup 'IAX2/Trunk-GSM-9'
>>
>>
>> _______________________________________________
>> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>>
>> asterisk-ss7 mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-ss7
|