asterisk at nicox.org wrote: > Hello, > > I'm using the libss7 with svn-version 98 and have a bit problem with > dialing some numbers. > > The Problem: If i dial to a fi8xed network number and the carrier gives > back a ACM asterisk does not send a Alerting to the connected E1/PRI, If i > get a CPG from the carrier, anything is fine. > in SS7-Documentations i see that CGP and ACM is a Alerting and means not > correct the same, but both means that the dialed side is ringing. > > Does anybody have the same problem, or any idea for a patch, or is this > patched in a newer version of libss7? > As I understand it, ACM is equivalent to the PRI PROCEEDING message, which means that the number dialed is indeed a valid number and something is being done with it (but exactly what is not indicated). So, at least in chan_zap as it exists right now, when we receive an ACM message, we pass an AST_CONTROL_PROCEEDING back into the core. If this is incorrect behavior and someone has some documentation to prove that, I certainly would like to see this corrected. One thing you might want to do is to update your libss7 version (as we are now at rev 144, as well as your Asterisk version. Another thing that you could try is to add the 'r' flag to your Dial() statement, as that will cause ringing to indicate pretty much regardless of what's going on. Matthew Fredrickson > > thanks a lot > > > Nico > > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 -- Matthew Fredrickson Software/Firmware Engineer Digium, Inc.
|