Tom Chandler wrote: > After some testing, I am confused about how libss7 works in > an ANSI A-link setup > > (all dummy point codes) > > setup > > Switch A > pointcode = 001-001-001 > adjpointcode = 248-001-001 (STP ) > adjpointcode = 248-001-002 (STP ) > defaultdpc = 001-001-002 > > > Switch B > pointcode = 001-001-002 > adjpointcode (not defined) > defaultdpc = 001-001-001 > > > My question is on linkset alignment, should the linkset use the adjpointcode to align > the links. It appears that it is using the defaultdpc. (That would be F-Link setup). > My linkset comes up and is aligned, and calls pass, which if a true A-Link setup, should > not happen...... > > I am confused that my links are aligning, and the 248 point codes do not exist. If it is > a true A-link then the alignment should be to the adjointcodes ?? > > What am I missing or what is happening...... Can you post your zapata.conf? -- Matthew Fredrickson Software/Firmware Engineer Digium, Inc.
|