On Friday 13 June 2008 17:24:06 Shaon wrote: > zaptel.conf > > #Sangoma A108 port 1 [slot:13 bus:9 span:1] <wanpipe1> > span=1,0,0,ccs,hdb3 > bchan=2-15,17-31 > dchan=1 Why are you leaving out chan 16??? Presumably it's a normal bearer channel? span=1,1,0,ccs,hdb3 bchan=2-31 dchan=16 > #Sangoma A108 port 2 [slot:13 bus:9 span:2] <wanpipe2> > span=2,0,0,ccs,hdb3 > bchan=32-46,48-62 Same question... span=2,0,0,ccs,hdb3 bchan=32-62 > zapata.conf > > signalling=ss7 > ss7type = itu > linkset = 1 > pointcode = 4521 > adjpointcode = 9321 > defaultdpc = 9321 > sigchan = 1 > cicbeginswith=2 > channel = 2-15,17-31,32-46,48-62 sigchan = 1 cicbeginswith=1 channel = 2-62 CICs are usually numbered from 1 and do not include the signalling channel. In any case, the settings must match the other end and if it's a typical PBX/switch then the settings I've added above would probably work if you only have one signaling channel. - Barry
|