Hi there! I have a problem with chan_ss7 working with Sangoma A104 card. On port 1st and 2nd I have E1 configured and it works fine. Port 3rd and 4th I have to configure with ss7. load chan_ss7.so Unable to load module chan_ss7.so Jan 15 10:13:15 NOTICE[11798]: config.c:549 load_config_link: Configured link 'port3' on linkset 'siuc', firstcic=65 Jan 15 10:13:15 NOTICE[11798]: config.c:549 load_config_link: Configured link 'port4' on linkset 'siuc', firstcic=97 Jan 15 10:13:15 WARNING[11798]: config.c:795 load_config_host: Missing interface entries for host 'ast'. Jan 15 10:13:15 NOTICE[11798]: config.c:959 load_config: Configuring DPC 1 for linkset 'siuc'. Jan 15 10:13:15 WARNING[11798]: transport.c:134 openchannel: Failure in ZT_SPECIFY for circuit 65: Device or resource busy. Jan 15 10:13:15 ERROR[11798]: chan_ss7.c:839 ss7_load_module: Unable to initialize ISUP. Jan 15 10:13:15 WARNING[11798]: loader.c:415 __load_resource: chan_ss7.so: load_module failed, returning -1 Any Ideas? My configs: /etc/asterisk/ss7.conf [linkset-siuc] enabled => yes enable_st => no use_connect => no hunting_policy => even_mru subservice => auto context=default language=pl [link-port3] linkset => siuc channels => 1-15,17-31 schannel => 78 firstcic => 65 enabled=yes [link-port4] linkset => siuc channels => 1-31 schannel => firstcic => 97 enabled=yes [host-ast] enabled => yes opc => 0x2 dpc => siuc:0x1 links => port3:1,port4:2 /etc/zaptel.conf loadzone=pl defaultzone=pl span=1,0,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 span=2,0,0,ccs,hdb3,crc4 bchan=32-46,48-62 dchan=47 span=3,0,0,ccs,hdb3,crc4 bchan=63-93 span=4,0,0,ccs,hdb3,crc4 bchan=94-124 (all ports look fine atfer ztcfg -vvv) /etc/wanpipe/wanpipe3.conf [devices] wanpipe3 = WAN_AFT_TE1, Comment [interfaces] w3g1 = wanpipe3, , TDM_VOICE, Comment [wanpipe3] CARD_TYPE = AFT S514CPU = A CommPort = PRI AUTO_PCISLOT = NO PCISLOT = 1 PCIBUS = 2 FE_MEDIA = E1 FE_LCODE = HDB3 FE_FRAME = CRC4 FE_LINE = 3 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_SIG_MODE = CCS TE_HIGHIMPEDANCE = NO LBO = 120OH FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 3 TDMV_DCHAN = 0 [w3g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = NO /etc/wanpipe/wanpipe4.conf [devices] wanpipe4 = WAN_AFT_TE1, Comment [interfaces] w4g1 = wanpipe4, , TDM_VOICE, Comment [wanpipe4] CARD_TYPE = AFT S514CPU = A CommPort = PRI AUTO_PCISLOT = NO PCISLOT = 1 PCIBUS = 2 FE_MEDIA = E1 FE_LCODE = HDB3 FE_FRAME = CRC4 FE_LINE = 4 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_SIG_MODE = CCS TE_HIGHIMPEDANCE = NO LBO = 120OH FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 4 TDMV_DCHAN = 0 [w4g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = NO Pozdrawiam / Regards Pawe? Ratajewski VoIP Administrator Dzia? Us?ug G?osowych pawel.ratajewski at 4web.pl ----------------------------------------------- Forweb S.C. ?agiewnicka 54/56, 91-463 ??d? tel: +48 42 235 10 00, fax: +48 42 235 10 01 biuro at 4web.pl http://www.4web.pl -----------------------------------------------
|