Grant Arix wrote: > Hi everybody, > > I installed Libss7 and it works fine. However i think i have a little problem with zapata channels map. > > In fact, I've got 2 E1s port on digium card. Below the channels map. > > //first E1 port > > cicbeginwith = 1 > channel =1-15 > cicbeginwith = 17 > channel =17-31 > sigchan = 16 > > // Second E1 port > > cicbeginwith = 33 > channel =33-47 > cicbeginwith = 49 > channel =49-63 > sigchan = 48 > > but when i launch my asterisk, he says that he can't open the 63th channel. And anyway the channels from 33-62 are "In service". > > Can you tell where this problem come from ? Zap/63 would be on the third E1 on the system. Are you running 3 E1s in your SS7 setup? Just for reference, Zap/1-Zap/31 is the first E1 and Zap/32-Zap/62 would be the second E1. -- Matthew Fredrickson Software/Firmware Engineer Digium, Inc.
|