Salut Elkhomeini, (it is better to continue in English for the benefit of the International community...) PDP - We are all here to help each other and to learn. Do the Telco staff have an SS7 analyser (GN Nettest, Tekelec, Siemens etc.) ? It is time to use an independent device to help you see what signals are being sent by the Alcatel and the Asterisk switches. It is quite common to have some sort of misalignment (CICs/signalling timeslots/point codes) but sometimes you need to be able to see both sides of the "conversation" at the same time so you can see where the problem is. To check that the signalling timeslots are in the right place you can use a PRI tester (Trend Aurora etc) and you can listen to the signalling to confirm it is where you expect it to be. When you use an audio monitor on TS16 the signalling sounds like a buzzing bee. Many people forget that TS0 is for timing and this results in the signalling being misplaced by one timeslot. Bonne chance! Darren On 25/02/2008, Elkhomeini <elkhomeini at yahoo.fr> wrote: > > Bonjour, > merci beaucoup pour votre aide , > > > Je crois que mon grand probleme maintenant est : la reponse de la question > du l'operateur c'est qoui le coc dans mon fichier de configuration c'est le > linkset ? ? > > l'operateur il a dit que il peut voir seulment le MTP3 layer ( celui qui > fait la signalisaion ) > > j'ai fait vos indications > mercci de suivais avec moi le probleme > > *"Storer, Darren" <darren.storer at gmail.com>* a ?crit : > > Salut Elkhomeini, > > Here are a few basic suggestions: > > - ask the Telco staff to check that they can see layer one from your > Asterisk system > - check that your signalling timeslot (usually 16) is aligned with the > signalling from the Alcatel switch. You can use a GN Nettest MPA to auto > configure and display the signalling timeslot alignment on both systems. > - loop back TX and RX on the first E1 towards the Alcatel switch and ask > the Telco staff if they can see layer one, then ask if layer two starts to > align and fails. This will help to prove all the cabling/transmission > circuits up to the point of interconnect to your Asterisk system. > > Bien amicalement > > Darren > > On 24/02/2008, Elkhomeini <elkhomeini at yahoo.fr> wrote: > > > > hi , > > thank you for your repponse > > > > > > My problem is : > > > > I have a serveur Lunix red hat with asterisk libss7 zaptel 1.4 , I would > > like to set with a switche OCB 3.3 alcatel , > > to make test when I make leason betwwen E1 port and the switch , the > > operators menager dont detect a signal > > If a use Zap show status aget E1 ok !! > > > > My cartd Is TE410P > > my poit cod is 2 > > adj point cod is 4500 > > linkset =1 ? > > > > thank you for your help . > > > > > > *"Storer, Darren" <darren.storer at gmail.com>* a ?crit : > > > > Hi, > > > > it is not possible to send you my config files as I don't have access to > > my SS7 model system; I'm working from a client's site at the moment. My > > model is using a single E1 Digium card so it might be better for you to > > request files from another libss7 user. > > > > In the meantime, have you tried looping back your E1 circuits and > > observing the SS7 traces by using the "ss7 debug linkset" command? In > > production SS7 systems we see the circuits attempt to align when we loop the > > signalling links back; they will fail to come up when the point > > codes clash... > > > > HTH > > > > Darren > > > > On 22/02/2008, Elkhomeini <elkhomeini at yahoo.fr> wrote: > > > > > > thankyou for your answer , > > > can you sende me exemple of zapata and zaptel for asterisk 1.4-r3490echo > > > > > > I am sure now that my MTP1 is Ok , but may be I have a problem In MTP2 > > > how I can verifed this ? > > > > > > thankyou > > > *"Storer, Darren" <darren.storer at gmail.com>* a ?crit : > > > > > > Hi, > > > > > > E> *dos TE410P support SS7-ISUP * > > > > > > Yes, I have used much lower specification cards with lib-ss7. > > > > > > Cheers > > > > > > Darren > > > > > > > > > On 21/02/2008, Elkhomeini <elkhomeini at yahoo.fr> wrote: > > > > > > > > Hi please Can you help me : > > > > > > > > > > > > *dos TE410P support SS7-ISUP ?* > > > > > > > > *Antoine Megalla <aatef at rocketmail.com>* a ?crit : > > > > > > > > Thank you very much Marek, > > > > > > > > The new chan_ss7-1.0.9 has been working flawlessly for > > > > the past 18 hours > > > > without loosing a single IDLE channel. > > > > > > > > Thanks again, you made my day, > > > > > > > > Antoine Megalla. > > > > > > > > ----- Original Message ----- > > > > From: "marek cervenka" > > > > To: > > > > Sent: Wednesday, February 20, 2008 6:16 PM > > > > Subject: Re: [asterisk-ss7] "No Idle Circuit found" > > > > after sometime > > > > > > > > > > > > > On Wed, 20 Feb 2008, Antoine Megalla wrote: > > > > > > > > > >> Hi, > > > > >> > > > > >> I am using chan_ss7 1.0.0 with success, where I > > > > pass SIP calls to SS7 > > > > >> switch, however I am facing a nagging problem that > > > > prevents the > > > > >> deployment in a production environment. > > > > > > > > > > > > > > > try > > > > http://www.dicea.dk/download/chan_ss7-1.0.9.tar.gz > > > > > > > > > > --------------------------------------- > > > > > Marek Cervenka > > > > > ======================================= > > > > > > > > > > > > > > > _______________________________________________ > > > > > --Bandwidth and Colocation Provided by > > > > http://www.api-digital.com-- > > > > > > > > > > asterisk-ss7 mailing list > > > > > To UNSUBSCRIBE or update options visit: > > > > > > > > > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ____________________________________________________________________________________ > > > > Looking for last minute shopping deals? > > > > Find them fast with Yahoo! Search. > > > > http://tools.search.yahoo.com/newsearch/category.php?category=shopping > > > > > > > > _______________________________________________ > > > > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > > > > > > > asterisk-ss7 mailing list > > > > To UNSUBSCRIBE or update options visit: > > > > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > > > > > > > > > > > > > > > > > > > > * OULD MOULAY ELY Elkhomeini* > > > > * GSM : + 222 7 10 60 87* > > > > ------------------------------ > > > > Ne gardez plus qu'une seule adresse mail ! Copiez vos mails<http://fr.rd.yahoo.com/mail/mail_taglines/trueswitch/SIG=11gshn0bu/**http%3A%2F%2Fwww.trueswitch.com%2Fyahoo-fr%2F>vers Yahoo! Mail > > > > > > > > _______________________________________________ > > > > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > > > > > > > asterisk-ss7 mailing list > > > > To UNSUBSCRIBE or update options visit: > > > > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > > > > > > > > > > > > > > > > -- > > > Darren Storer > > > Comgate > > > http://www.comgate.co.uk > > > Telco|Internet|Broadcast > > > _______________________________________________ > > > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > > > > > asterisk-ss7 mailing list > > > To UNSUBSCRIBE or update options visit: > > > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > > > > > > > > > > > > > > > * OULD MOULAY ELY Elkhomeini* > > > * GSM : + 222 7 10 60 87* > > > ------------------------------ > > > Ne gardez plus qu'une seule adresse mail ! Copiez vos mails<http://fr.rd.yahoo.com/mail/mail_taglines/trueswitch/SIG=11gshn0bu/**http%3A%2F%2Fwww.trueswitch.com%2Fyahoo-fr%2F>vers Yahoo! Mail > > > > > > _______________________________________________ > > > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > > > > > asterisk-ss7 mailing list > > > To UNSUBSCRIBE or update options visit: > > > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > > > > > > > > > _______________________________________________ > > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > > > asterisk-ss7 mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > > > > > > > > > > * OULD MOULAY ELY Elkhomeini* > > * GSM : + 222 7 10 60 87* > > ------------------------------ > > Ne gardez plus qu'une seule adresse mail ! Copiez vos mails<http://fr.rd.yahoo.com/mail/mail_taglines/trueswitch/SIG=11gshn0bu/**http%3A%2F%2Fwww.trueswitch.com%2Fyahoo-fr%2F>vers Yahoo! Mail > > > > _______________________________________________ > > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > > > asterisk-ss7 mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > > > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > > > > > * OULD MOULAY ELY Elkhomeini* > * GSM : + 222 7 10 60 87* > > ------------------------------ > Ne gardez plus qu'une seule adresse mail ! Copiez vos mails<http://fr.rd.yahoo.com/mail/mail_taglines/trueswitch/SIG=11gshn0bu/**http%3A%2F%2Fwww.trueswitch.com%2Fyahoo-fr%2F>vers Yahoo! Mail > > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > -- Darren Storer Comgate Telco|Internet|Broadcast -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20080225/d6f5a5c7/attachment.htm
|