Hi ALL, This configuration "signalling=s7" was just a write error, in my zapata.conf I have written "signalling=ss7". When I had installed the sources, I have download libpri, libss7 and asterisk from svn, and zaptel from http://www.govarion.com/tor3/. Now I remove this sources and make again. I downloaded just libss7 and asterisk from trunk svn, and at this time I downloaded libpri from www.asterisk.org/downloads, and now all seems work fine. I will do more tests, and if some thing doesn`t work well I will post again. Thank`s for your help Joseph. Everton Goularth Joseph wrote: > On 02/09/08, Everton Goularth wrote: > >> Thank's Joseph for the suggestion, >> >> but I have already looked at both (zaptel and zapata) samples config files. >> >> As a mater of fact, my dchan for my first E1 is the channel 16, and because this I'm >> think that is something strange. "ztcfg -vv" doesn't show me any error. >> >> I'm not using a digium card, I'm using Tormenta card with 4 E1 ports. >> (http://www.govarion.com/index.php?main_page=product_info&products_id=1&zenid=ab3abadc9d3f2bf11a620f24b89970ae) >> >> My config files: >> >> zaptel.conf: >> ------------------------------- >> defaultzone=br >> loadzone=br >> >> span=1,0,0,ccs,hdb3 >> bchan=1-15 >> dchan=16 >> bchan=17-31 >> ------------------------------- >> >> zapata.conf >> ------------------------------- >> [channels] >> language=br >> context=ss7 >> switchtype=eurisdn >> nfs=none >> signalling=s7 >> > > This should be: signalling = ss7 > > >> group = 1 >> ss7type = itu >> linkset= 1 >> pointcode = XXX >> adjpointcode = YYYY >> defaultdpc = YYYY >> cicbeginwith = 1 >> networkindicator = national >> sigchan = 16 >> channel = 1-15 >> channel = 17-31 >> > > Not sure if this matters, but should channels not be: "channel => 1-15" > instead of "channel = 1-15" > > > Do you have debug turned on in your logger.conf for console and logged > messages? > > console => notice,warning,error,debug > messages => notice,warning,error,debug > > If possible, it would be good if you could turn debugging on, at the > remote ss7 as well, or have someone watch to see what is happening. > Also, if possible, get a digium card to test with in case hardware is an > issue. I did not have any success getting a 56k circuit to work. > However a 64 bit works fine. > > > ------------------------------------------------------------------------ > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20080211/148a6eee/attachment.htm
|