> Try
>
> 1.0.10
> Zaptel 1.4.9
Thanks for the suggestion, I will let it run on chan_ss7 1.0.10 + zaptel 1.4.9 for a few days to see if the problems still arises.
> Is TE120P - 2 ports card?
TE120P is a single port card.
> What hardware do you use and what PC?
HP Proliant (cant recall the model number) with Intel Dual Xeon 3.06Ghz and 2GB of RAM. BTW, I am using CentOS 5.0, uname -a
Linux host1 2.6.18-8.el5 #1 SMP Thu Mar 15 19:57:35 EDT 2007 i686 i686 i386 GNU/Linux
> Did you check Interrupts conflict?
cat /proc/interrupts
CPU0 CPU1
0: 528769011 528741165 IO-APIC-edge timer
8: 1 0 IO-APIC-edge rtc
9: 1 0 IO-APIC-level acpi
10: 0 0 IO-APIC-level ohci_hcd:usb1
14: 1862174 1868810 IO-APIC-edge ide0
169: 189863438 0 IO-APIC-level eth0
185: 709744251 708515144 IO-APIC-level wcte12xp0
NMI: 0 0
LOC: 1057598343 1057598341
ERR: 0
MIS: 0
> Does your kernel compiled with 1000Hz?
In my /boot/config-2.6.18-8.el5 :-
CONFIG_HZ_1000=y
CONFIG_HZ=1000
--- On Wed, 6/8/08, Anton <anton.vazir at gmail.com> wrote:
> From: Anton <anton.vazir at gmail.com>
> Subject: Re: [asterisk-ss7] chan_ss7 - unstable link
> To: yusiang at yahoo.com
> Cc: asterisk-ss7 at lists.digium.com
> Date: Wednesday, 6 August, 2008, 3:22 PM
>
> Is TE120P - 2 ports card? What hardware do you use and what
>
> PC? Did you check Interrupts conflict? Does your kernel
> compiled with 1000Hz?
>
> On Wednesday 06 August 2008 11:46, Low Yu Siang wrote:
> > chan_ss7 1.0.93
> > Zaptel 1.4.11
> > Asterisk 1.4.15
> > libpri 1.4.3
> > I am using a Digium TE120P.
> >
> > Thanks.
> >
> > --- On Wed, 6/8/08, Anton
> <anton.vazir at gmail.com> wrote:
> > > From: Anton <anton.vazir at gmail.com>
> > > Subject: Re: [asterisk-ss7] chan_ss7 - unstable
> link
> > > To: asterisk-ss7 at lists.digium.com,
> yusiang at yahoo.com
> > > Date: Wednesday, 6 August, 2008, 2:37 PM
> > > Versions of asterisk zaptel and chan_ss7?
> > >
> > > On Wednesday 06 August 2008 11:27, Low Yu Siang
> wrote:
> > > > Hi all,
> > > >
> > > > After running for days(~300 incoming calls),
> the link
> > > > became unstable. Whenever a call is coming
> in, it
> > >
> > > throws
> > >
> > > > the following error messages. This call is
> accepted
> > > > properly but all other calls cant be
> accepted during
> > >
> > > this
> > >
> > > > moment(since the signalling link is already
> down),
> > >
> > > until
> > >
> > > > the link automatically comes up again.
> > > >
> > > > [Aug 6 11:07:43] NOTICE[25980]: mtp.c:1800
> > > > mtp_thread_main: Empty Zaptel output buffer
> detected,
> > > > outgoing packets may have been lost on link
> > >
> > > 'l1'. [Aug 6
> > >
> > > > 11:07:43] NOTICE[25980]: mtp.c:1748
> mtp_thread_main:
> > >
> > > Full
> > >
> > > > Zaptel input buffer detected, incoming
> packets may
> > >
> > > have
> > >
> > > > been lost on link 'l1' (count=64.
> [Aug 6
> > >
> > > 11:07:43]
> > >
> > > > NOTICE[25980]: mtp.c:1015 mtp2_process_lssu:
> Got
> > >
> > > status
> > >
> > > > indication 'OS' while INSERVICE on
> link
> > >
> > > 'l1'. [Aug 6
> > >
> > > > 11:07:43] WARNING[25980]: chan_ss7.c:622
> > >
> > > process_event:
> > > > MTP is now DOWN on link 'l1'. [Aug
> 6
> > >
> > > 11:07:43]
> > >
> > > > NOTICE[25980]: mtp.c:588 mtp_changeover: MTP
> > >
> > > changeover
> > >
> > > > last_ack=3, last_sent=3, from schannel 16,
> no
> > >
> > > INSERVICE
> > >
> > > > schannel found [Aug 6 11:07:43]
> NOTICE[25980]:
> > >
> > > mtp.c:592
> > >
> > > > mtp_changeover: Failover not possible, no
> other
> > > > signalling link and no other host available.
> [Aug 6
> > > > 11:07:43] WARNING[25980]: chan_ss7.c:622
> > >
> > > process_event:
> > > > MTP is now DOWN on link 'l1'. [Aug
> 6
> > >
> > > 11:07:43]
> > >
> > > > WARNING[25980]: mtp.c:1931 mtp_thread_main:
> No
> > >
> > > signalling
> > >
> > > > links inservice and no cluster receivers
> alive,
> > >
> > > dropping
> > >
> > > > packet! [Aug 6 11:07:45] NOTICE[25980]:
> mtp.c:1138
> > > > mtp2_good_frame: Sending TRA to peer on link
> > >
> > > 'l1'....
> > >
> > > > [Aug 6 11:07:45] WARNING[25980]:
> chan_ss7.c:618
> > > > process_event: MTP is now UP on link
> 'l1'.
> > > >
> > > > Any help/suggestion would be greatly
> appreciated.
> > > >
> > > > Regards,
> > > > Low Yu Siang
> > >
> > >
> _______________________________________________________
> > >__
> > >
> > > >_ Not happy with your email address?.
> > > > Get the one you really want - millions of
> new email
> > > > addresses available now at Yahoo!
> > > > http://uk.docs.yahoo.com/ymail/new.html
> > > >
> > > >
> _______________________________________________
> > > > --Bandwidth and Colocation Provided by
> > > > http://www.api-digital.com--
> > > >
> > > > asterisk-ss7 mailing list
> > > > To UNSUBSCRIBE or update options visit:
> > >
> > >
> http://lists.digium.com/mailman/listinfo/asterisk-ss7
> >
> >
> >
> _________________________________________________________
> >_ Not happy with your email address?.
> > Get the one you really want - millions of new email
> > addresses available now at Yahoo!
> > http://uk.docs.yahoo.com/ymail/new.html
__________________________________________________________
Not happy with your email address?.
Get the one you really want - millions of new email addresses available now at Yahoo! http://uk.docs.yahoo.com/ymail/new.html
|