On 04/17/08, olivier taylor wrote: > re, > > I also need clarification about pointcode(s) > > Pointcode is OK, but what are adjpointcode and defaultdpc? > Is it mandatory to have values for these entries? So normally you have at least 3 point codes: pointcode = my asterisk box with ss7 adjpointcode = the ss7 box directly connected to me defaultdpc = the ss7 device that I am doing trunks/CICs with If you are going straight to the ss7 device with trunks, you can possibly make adjpointcode and defaultdpc the same. > > The provider gave me only the pointcode in the form '2-8001', I have > tranformed it to 8001 and it's ok. Make sure you know if you are doing ansi or itu point codes and get that setting right or it might not work. ; -- From the Config -- ; Variant of SS7 signaling: ; Options are itu and ansi ;ss7type = itu -- respectfully, ------------------------------------- | Joseph | IT | ------------------------------------- -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: Digital signature Url : http://lists.digium.com/pipermail/asterisk-ss7/attachments/20080417/4a0a397a/attachment.pgp
|