On 04/04/08, antonio latorre lopez wrote: > > Hello,I am trying to set up a system with a Digium card TE420 and libss7. I have installed zaptel libss7 and asterisk from the trunk and configured it to have a linkset working. In the Asterisk console I get:Link state change: IDLE -> NOTALIGNEDLink state change: NOTALIGNED -> IDLELink state change: IDLE -> NOTALIGNEDLink state change: NOTALIGNED -> IDLELink state change: IDLE -> NOTALIGNEDLink state change: NOTALIGNED -> IDLEAnd when I run the linktest program, I have the following error:./ss7linktest 16 itu 1 2Could not open device 16: Device or resource busyDoes it mean that the card is not correctly installed? Does anyone have the same issue?Thank you for your help.Patxi, Make sure the sigchannels are right. Make sure the t1 is up, not Red or Yellow. Check your card with "cat /proc/zap*" And make sure you and your provider both are doing either 56k or 64k. -- respectfully, ------------------------------------- | Joseph | IT | ------------------------------------- -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: Digital signature Url : http://lists.digium.com/pipermail/asterisk-ss7/attachments/20080404/ccece034/attachment.pgp
|