---------------------------- Original Message ---------------------------- Subject: [Fwd: Astersik+ss7] From: shaon@xxxxxxxxxxxx Date: Sat, May 19, 2007 10:00 am To: asterisk-ss7@xxxxxxxxxxxxxxxx -------------------------------------------------------------------------- Dear All, I am using asterisk+ss7+TE407P card at my box. here i have 4 E1 and only one signal channel. problem is that my 1st E1 work fine. but from 2 to 4th E1 i have got only ring tone but no voice from both side. what is the problem. pls suggest me. here is my conf file zaptel.conf --------------- span=1,1,2,ccs,hdb3 bchan=1-15 dchan=16 bchan=17-31 span=2,1,2,ccs,hdb3 bchan=33-63 span=3,1,2,ccs,hdb3 bchan=65-95 #bchan=1-31 span=4,1,2,ccs,hdb3 bchan=97-124 zapta.conf ----------- adjpointcode = 1010 defaultdpc = 14671 networkindicator=national ; First signaling channel sigchan = 16 ; Begin CIC (Circuit indication codes) count with this number group =>1 cicbeginswith = 1 ; Channels to associate with CICs on this linkset channel => 1-15 ; another cicbeginwith, so channel 16 is used for signalling cicbeginswith = 17 channel => 17-31 group => 2 cicbeginswith = 33 channel => 33-63 group => 3 cicbeginswith = 65 channel => 65-95 group => 4 cicbeginswith = 97 channel => 97-124 ----------------- pls suggest me Best Regards shaon
|