If I do that the following message appears: Asterisk Ready. *CLI> *CLI> Mar 28 10:37:34 WARNING[23738]: mtp.c:1669 mtp_thread_main: No signalling links inservice and no cluster receivers alive, dropping packet! Any ideas ?! On 3/14/07, umar tarar <umar.tarar@xxxxxxxxx> wrote: > > are you sure that u've two E1s each have a signalling link, if not then > you should change the statement 'schannel=>16' in [link-ls] to as > 'schannel=>' (i.e. don't specify '16' in it) > > On 3/12/07, Alexandre <alexandrekeller@xxxxxxxxx> wrote: > > > Hi there !!! > > > > I've installed chan_ss7-0.9 on my Asterisk 1.2.16 and Zaptel-1.2.15. > > > > My zaptel.conf: > > atualss7:/etc/asterisk# cat ../zaptel.conf > > span=1,1,0,ccs,hdb3 > > bchan=1-31 > > > > span=2,0,0,ccs,hdb3 > > bchan=32-62 > > > > loadzone = us > > defaultzone=us > > > > My ss7.conf > > atualss7:/etc/asterisk# cat ss7.conf > > [linkset-siuc] > > enabled => yes > > enable_st => no > > use_connect => yes > > hunting_policy => even_mru > > context => ss7 > > ; The value and action for t35. Value is in msec, action is either st or > > timeout > > ; If you use overlapped dialling dial plan, you might choose: t35 => > > 4000,st > > t35 => 15000,timeout > > ; The subservice field: national (8), international (0), auto or > > decimal/hex value > > ; The auto means that the subservice is obtained from first received > > SLTM > > subservice => auto > > > > > > [link-l1] > > linkset => siuc > > channels => 1-15,17-31 > > schannel => 16 > > firstcic => 1 > > enabled => yes > > ; Echo cancellation > > ; echocancel can be one of: no, 31speech (enable only when transmission > > medium is 3.1Khz speech), always > > echocancel => allways > > ; echocan_train specifies training period, between 10 to 100 msec > > ;echocan_train => 350 > > ; echocan_taps specifies number of taps, 32, 64, 128 or 256 > > echocan_taps => 128 > > > > > > [link-l2] > > linkset => siuc > > channels => 1-15,17-31 > > schannel => 16 > > firstcic => 33 > > enabled => yes > > > > [host-atualss7] > > enabled => yes > > ;opc => 0x8e0 > > opc => 0x7d8 > > ;dpc => siuc:0x3fff > > dpc => siuc:0x822 > > links => l1:1,l2:2 > > I?ve been trying to Dial as it follows: > > Mar 7 13:30:10 DEBUG[4222]: pbx.c:1697 pbx_extension_helper: Launching > > 'Dial' > > -- Executing Dial("SIP/1234-081dca60", "SS7/49115002") in new stack > > -- SS7 request (SS7/49115002) format = 0x8. > > -- SS7 channel SS7/49115002 allocated successfully. > > > > My SS7 tech guy says he is receveing: Astk: IAM REL-29, than my PSTN > > answers with a RLC, but nothing happens, my softfoen keeps ring until gets a > > timeout. > > > > My PSTN PBX, where SS7 Link is connected is a SPTel DSX-100. > > > > Any help would be great. Because we're needing to install another 10 > > links exactly like that using chan_ss7. > > > > Thanks in advance, > > > > _______________________________________________ > > --Bandwidth and Colocation provided by Easynews.com -- > > > > asterisk-ss7 mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > > > > > > > -- > |__\__/__| /__/ \__\ |__| \__| > > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20070328/d8cae8f2/attachment.htm
![]() |