Dear list,
I'm trying to configure an Asterisk GW (Debian sarge w/ last
trunk cvs version - r69519M). All the source compile fine and I can install
them without problem.
In the Asterisk side, I see this:
*CLI> ss7 show linkset 1
SS7 linkset 1 status: Up
*CLI> zap show status
Description Alarms IRQ
bpviol CRC4
Digium Wildcard TE110P T1/E1 Card 0 OK 0 0
0
*CLI> zap show channels
Chan Extension Context Language MOH Interpret
Blocked State
pseudo prepago es default
In Service
1 prepago es default
Out of Ser
2 prepago es default
Out of Ser
.
31 prepago es default
Out of Ser
In the PBX side (Siemens SDE, SS7 protocols like EWSD), the
status seems to be down.
When a set debug for SS7, I see this:
*CLI> ss7 debug linkset 1
Enabled debugging on linkset 1
*CLI> Len = 3 [ 81 82 00 ]
FSN: 2 FIB 1
BSN: 1 BIB 1
>[0] FISU
Len = 2 [ 82 81 ]
FSN: 1 FIB 1
BSN: 2 BIB 1
<[0] LSSU SIOS
Link state change: INSERVICE -> IDLE
Len = 2 [ ff ff ]
FSN: 127 FIB 1
BSN: 127 BIB 1
<[0] LSSU SIO
Link state change: IDLE -> ALIGNED
Len = 2 [ ff ff ]
FSN: 127 FIB 1
BSN: 127 BIB 1
<[0] LSSU SIE
Link state change: NOTALIGNED -> PROVING
T4 expired!
Link state change: PROVING -> ALIGNEDREADY
Len = 3 [ ff ff 00 ]
FSN: 127 FIB 1
BSN: 127 BIB 1
>[0] FISU
Len = 1 [ ff ]
FSN: 127 FIB 1
BSN: 127 BIB 1
<[0] FISU
Link state change: ALIGNEDREADY -> INSERVICE
Len = 20 [ ff 80 11 81 0c 72 83 0c 11 a0 32 35 36 34 32 38 36 32 38 38 ]
[ ff 80 11 ]
FSN: 0 FIB 1
BSN: 127 BIB 1
>[0] MSU
[ 81 ]
Network Indicator: 2 Priority: 0 User Part: STD_TEST
[ 0c 72 83 0c ]
OPC 12813 DPC 12812 SLS 0
[ 11 ]
H0: 1 H1: 1
Message type: COO
Len = 21 [ ff 80 14 81 0d 32 83 1c 11 d0 03 01 54 45 53 54 5f 43 4f 4e 46 ]
[ ff 80 14 ]
FSN: 0 FIB 1
BSN: 127 BIB 1
<[0] MSU
[ 81 ]
Network Indicator: 2 Priority: 0 User Part: STD_TEST
[ 0d 32 83 1c ]
OPC 12812 DPC 12813 SLS 1
[ 11 ]
H0: 1 H1: 1
Message type: COO
Len = 23 [ 80 81 14 81 0c 72 83 0c 21 d0 03 01 54 45 53 54 5f 43 4f 4e 46 49
47 ]
[ 80 81 14 ]
FSN: 1 FIB 1
BSN: 0 BIB 1
>[0] MSU
[ 81 ]
Network Indicator: 2 Priority: 0 User Part: STD_TEST
[ 0c 72 83 0c ]
OPC 12813 DPC 12812 SLS 0
[ 21 ]
H0: 1 H1: 2
Message type: COA
I appreciate very much your help.
Regards,
Claudio Aznar
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20070628/98c8ffb0/attachment-0001.htm
|