I talked with my Carrier, and the problem is that the "Propagation Delay Counter" which is given in ms is not set in chan_ss7 and the Ecrisson give an Confusion after this. Is it possible to set this counter in chan_ss7? Thanks Nico On Tue, 16 Jan 2007, Kristian Nielsen wrote: > asterisk@xxxxxxxxx writes: > >> There is the complete trace of this Call: >> >> http://www.nicox.org/links/ss7dump.txt > > CIC: 5 > Message type: Release (12) > Cause indicators, see Q.850 (2 bytes length) > Mandatory Parameter: 18 (Cause indicators) > Pointer to Parameter: 2 > Parameter length: 2 > Cause indicators (-> Q.850) > .... 1010 = Cause location: Network beyond interworking point (BI) (10) > .00. .... = Coding standard: ITU-T standardized coding (0x00) > 1... .... = Extension indicator: last octet > .000 0001 = Cause indicator: Unallocated (unassigned) number (1) > 1... .... = Extension indicator: last octet > No optional parameter present (Pointer: 0) > > Note this: "Cause indicator: Unallocated (unassigned) number". > > That would seem to indicate that the called number (+38111821145) is not > valid? > > Not sure if that is the reason for the confusion message though (cannot > remember exactly when confusion is sent). > > Is the circuit CIC=5 correctly configured at both ends? But I guess if that > was the problem, you would instead have gotten "unequipped CIC". > > - Kristian. > > -- > Kristian Nielsen, Software Developer > MySQL AB, Hvidovre, Denmark, www.mysql.com > Office: +46 18 174 400 ext. 4525 > Are you MySQL certified? www.mysql.com/certification > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 >
|