yusuf wrote: > Hi, > > So today I started getting to know chan_ss7. The issue is I want to > test chan_ss7, but I only have 1 Asterisk box and 1 4-port Diiagium E1 > card. I want to know, and please understand my ignorance of ss7 :), > if I only have 1 box, with a Digium 4 port E1 card, and I want to dial > out on port1 and recieve the call on port2, do I configure two links > with one linkset, or two seperate linksets (I am following the templates) > > Also, with the above config, is this correct: > > [link-l1] > linkset => outgoing1 > channels => 1-15,17-31 > schannel => 16 > firstcic => 1 > enabled => yes > > [link-l2] > linkset => incoming2 > channels => 1-15,17-31 > schannel => 16 > firstcic => 32 > enabled => yes > > is my channels labled correctly? > > > > Yusuf, with what you pasted, it should be 2 linksets. however, i guess first cic on the second e1 should be 33 not 32. the schannels should not be specified on the second link, since you have only one signalling link for the two links. goksie
|