Try to switch off the hardware echo canceler TDMV_HWEC = YES On Monday 03 December 2007, Goke Aruna wrote: > I have used asterisk-1.4.14, zaptel-1.4.7, chan_ss7-1.0.0 > on FC7 all went okay. using sangoma a104dx on both > machine. > > I followed the write up on > http://www.voip-info.org/wiki/index.php?page=Asterisk+ss7 >+setup > > I have the cross over cable between them. > > however, wanpipe shows connected but the signaling link > does not align. > > i have my configs for host A > > ##wanpipe1.conf > > [devices] > wanpipe1 = WAN_AFT_TE1, Comment > > [interfaces] > w1g1 = wanpipe1, , TDM_VOICE, Comment > > [wanpipe1] > CARD_TYPE = AFT > S514CPU = A > CommPort = PRI > AUTO_PCISLOT = NO > PCISLOT = 4 > PCIBUS = 15 > FE_MEDIA = E1 > FE_LCODE = HDB3 > FE_FRAME = NCRC4 > FE_LINE = 1 > TE_CLOCK = MASTER > TE_REF_CLOCK = 0 > TE_HIGHIMPEDANCE = NO > LBO = 120OH > TE_SIG_MODE = CCS > FE_TXTRISTATE = NO > MTU = 1500 > UDPPORT = 9000 > TTL = 255 > IGNORE_FRONT_END = NO > TDMV_SPAN = 1 > TDMV_DCHAN = 0 > > [w1g1] > ACTIVE_CH = ALL > TDMV_ECHO_OFF = NO > TDMV_HWEC = YES > > > # zaptel.conf > > loadzone=uk > defaultzone=uk > > span=1,1,0,ccs,hdb3 > bchan=1-31 > > ### ss7.conf > > [linkset-ennie] > enabled => yes > use_connect => yes > enable_st => no > hunting_policy => odd_lru > subservice => auto > context = default > > [link-l1] > linkset => ennie > channels => 1-15,17-31 > schannel => 16 > firstcic => 1 > enabled => yes > > [link-l2] > linkset => ennie > channels => 1-31 > schannel => > firstcic => 33 > enabled => yes > > [link-l3] > linkset => ennie > channels => 1-31 > schannel => > firstcic => 65 > enabled => no > > [link-l4] > linkset => ennie > channels => 1-31 > schannel => > firstcic => 97 > enabled => no > > [host-A] > enabled => yes > opc => 998 > dpc => ennie:98 > links => l1:1 > > > for the slave host B > > ##wanpipe1.conf > > [devices] > wanpipe1 = WAN_AFT_TE1, Comment > > [interfaces] > w1g1 = wanpipe1, , TDM_VOICE, Comment > > [wanpipe1] > CARD_TYPE = AFT > S514CPU = A > CommPort = PRI > AUTO_PCISLOT = NO > PCISLOT = 4 > PCIBUS = 15 > FE_MEDIA = E1 > FE_LCODE = HDB3 > FE_FRAME = NCRC4 > FE_LINE = 1 > TE_CLOCK = NORMAL > TE_REF_CLOCK = 0 > TE_HIGHIMPEDANCE = NO > LBO = 120OH > TE_SIG_MODE = CCS > FE_TXTRISTATE = NO > MTU = 1500 > UDPPORT = 9000 > TTL = 255 > IGNORE_FRONT_END = NO > TDMV_SPAN = 1 > TDMV_DCHAN = 0 > > [w1g1] > ACTIVE_CH = ALL > TDMV_ECHO_OFF = NO > TDMV_HWEC = YES > > > # zaptel.conf > > loadzone=uk > defaultzone=uk > > span=1,0,0,ccs,hdb3 > bchan=1-31 > > ### ss7.conf > > [linkset-mahmud] > enabled => yes > use_connect => yes > enable_st => no > hunting_policy => odd_lru > subservice => auto > context = default > > [link-l1] > linkset => mahmud > channels => 1-15,17-31 > schannel => 16 > firstcic => 1 > enabled => yes > > [link-l2] > linkset => mahmud > channels => 1-31 > schannel => > firstcic => 33 > enabled => no > > [link-l3] > linkset => mahmud > channels => 1-31 > schannel => > firstcic => 65 > enabled => no > > [link-l4] > linkset => mahmud > channels => 1-31 > schannel => > firstcic => 97 > enabled => no > > [host-B] > enabled => yes > opc => 98 > dpc => mahmud:998 > links => l1:1 > > > > Can someone advice on the way forward or has anyone > implemented chan_ss7-1.0.0. > > Thanks > > Goksie > > > _______________________________________________ > --Bandwidth and Colocation Provided by > http://www.api-digital.com-- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7
|