my zapata.conf was all empty( actually i checked my zapata.conf & it was
like:
----zapata.conf-----
[channels]
--------------------------
thats it)
and plz could you tell me abtout your previouse posts or where can i find
those?
On 9/21/06, Goke Aruna <goksie@xxxxxxxxx> wrote:
>
> what is the content of your zapata.conf?
>
> empty it and run ztcfg -vvv to clear all the channels and try run asterisk
> again
>
> am not an expert but you can dig for same which i posted few months ago.
>
> goksie
>
>
> On 9/21/06, umar tarar <umar.tarar@xxxxxxxxx> wrote:
>
> > still waiting, actually i've not been able to even run my Asterisk
> > server with an SS7 E1 link for once.........can any one help me in this
> > regard plz.....all conf & probs are described in the previous message to
> > this list
> >
> > On 9/18/06, umar tarar <umar.tarar@xxxxxxxxx > wrote:
> > >
> > > i am in urgent need to solve this problem
> > >
> > > what happens is:
> > > a- with the LED green on the Quad-E1 Digium-TE411P card & crc4 enabled
> > > in zaptel.conf, when we try to run Asterisk it simply shows some error
> > > related to zaptel & quits back to the LINUX prompt
> > >
> > > b- with the LED green & crc4 disabled in zaptel.conf, the asterisk
> > > initially runs successfully, but then starts showing these errors in
> > > chan_ss7 module relating to CRC
> > > ----------------------------(the CLI log):
> > > ------------------------------
> > > Asterisk Ready.
> > > *CLI> Sep 14 03:05:39 WARNING[5295]: mtp.c:760 timeout_sltm_t1: No
> > > SLTA received within Q.707 timer T1, trying again on link 'l1'.
> > > Sep 14 03:05:48 ERROR[5295]: mtp.c:765 timeout_sltm_t1: No SLTA
> > > received within Q.707 timer T1, faulting link on link 'l1'.
> > > Sep 14 03:05:48 WARNING[5295]: chan_ss7.c:3598 monitor_main: MTP is
> > > now DOWN on link 'l1'.
> > > Sep 14 03:05:48 NOTICE[5295]: mtp.c:471 mtp_changeover: MTP changeover
> > > last_ack=4, last_sent=4, from schannel 16, no INSERVICE schannel found
> > > Sep 14 03:05:48 NOTICE[5295]: mtp.c:475 mtp_changeover: Failover not
> > > possible, no other signalling link and no other host available.
> > > Sep 14 03:05:59 WARNING[5295]: mtp.c:760 timeout_sltm_t1: No SLTA
> > > received within Q.707 timer T1, trying again on link 'l1'.
> > > Sep 14 03:06:08 ERROR[5295]: mtp.c:765 timeout_sltm_t1: No SLTA
> > > received within Q.707 timer T1, faulting link on link 'l1'.
> > > Sep 14 03:06:08 WARNING[5295]: chan_ss7.c:3598 monitor_main: MTP is
> > > now DOWN on link 'l1'.
> > > Sep 14 03:06:08 NOTICE[5295]: mtp.c:471 mtp_changeover: MTP changeover
> > > last_ack=8, last_sent=8, from schannel 16, no INSERVICE schannel found
> > > Sep 14 03:06:08 NOTICE[5295]: mtp.c:475 mtp_changeover: Failover not
> > > possible, no other signalling link and no other host available.
> > > ss7 Sep 14 03:06:19 WARNING[5295]: mtp.c:760 timeout_sltm_t1: No SLTA
> > > received within Q.707 timer T1, trying again on link 'l1'.
> > > cluster Sep 14 03:06:21 WARNING[5295]: chan_ss7.c:3534 monitor_main:
> > > Received CIC=65 for unequipped circuit (typ=CGB), link 'l1'.
> > > status
> > > Sep 14 03:06:28 ERROR[5295]: mtp.c:765 timeout_sltm_t1: No SLTA
> > > received within Q.707 timer T1, faulting link on link 'l1'.
> > > Sep 14 03:06:28 WARNING[5295]: chan_ss7.c:3598 monitor_main: MTP is
> > > now DOWN on link 'l1'.
> > > Sep 14 03:06:28 NOTICE[5295]: mtp.c:471 mtp_changeover: MTP changeover
> > > last_ack=7, last_sent=7, from schannel 16, no INSERVICE schannel found
> > > Sep 14 03:06:28 NOTICE[5295]: mtp.c:475 mtp_changeover: Failover not
> > > possible, no other signalling link and no other host available.
> > >
> > > *CLI> ss7 linestat
> > > Linkset: suic
> > > CIC 1 Idle Reset pending BLOCKED Link down
> > > CIC 2 Idle Reset pending BLOCKED Link down
> > > CIC 3 Idle Reset pending BLOCKED Link down
> > > CIC 4 Idle Reset pending BLOCKED Link down
> > > CIC 5 Idle Reset pending BLOCKED Link down
> > > CIC 6 Idle Reset pending BLOCKED Link down
> > > CIC 7 Idle Reset pending BLOCKED Link down
> > > CIC 8 Idle Reset pending BLOCKED Link down
> > > CIC 9 Idle Reset pending BLOCKED Link down
> > > CIC 10 Idle Reset pending BLOCKED Link down
> > > CIC 11 Idle Reset pending BLOCKED Link down
> > > CIC 12 Idle Reset pending BLOCKED Link down
> > > CIC 13 Idle Reset pending BLOCKED Link down
> > > CIC 14 Idle Reset pending BLOCKED Link down
> > > CIC 15 Idle Reset pending BLOCKED Link down
> > > CIC 17 Idle Reset pending BLOCKED Link down
> > > CIC 18 Idle Reset pending BLOCKED Link down
> > > CIC 19 Idle Reset pending BLOCKED Link down
> > > CIC 20 Idle Reset pending BLOCKED Link down
> > > CIC 21 Idle Reset pending BLOCKED Link down
> > > CIC 22 Idle Reset pending BLOCKED Link down
> > > CIC 23 Idle Reset pending BLOCKED Link down
> > > CIC 24 Idle Reset pending BLOCKED Link down
> > > CIC 25 Idle Reset pending BLOCKED Link down
> > > CIC 26 Idle Reset pending BLOCKED Link down
> > > CIC 27 Idle Reset pending BLOCKED Link down
> > > CIC 28 Idle Reset pending BLOCKED Link down
> > > CIC 29 Idle Reset pending BLOCKED Link down
> > > CIC 30 Idle Reset pending BLOCKED Link down
> > > CIC 31 Idle Reset pending BLOCKED Link down
> > >
> > > *CLI> Sep 14 03:07:08 ERROR[5295]: mtp.c:765 timeout_sltm_t1: No SLTA
> > > received within Q.707 timer T1, faulting link on link 'l1'.
> > > Sep 14 03:07:08 WARNING[5295]: chan_ss7.c:3598 monitor_main: MTP is
> > > now DOWN on link 'l1'.
> > > Sep 14 03:07:08 NOTICE[5295]: mtp.c:471 mtp_changeover: MTP changeover
> > > last_ack=6, last_sent=6, from schannel 16, no INSERVICE schannel found
> > > Sep 14 03:07:08 NOTICE[5295]: mtp.c:475 mtp_changeover: Failover not
> > > possible, no other signalling link and no other host available.
> > > Sep 14 03:07:18 WARNING[5295]: mtp.c:760 timeout_sltm_t1: No SLTA
> > > received within Q.707 timer T1, trying again on link 'l1'.
> > > Sep 14 03:07:19 WARNING[5295]: chan_ss7.c:3534 monitor_main: Received
> > > CIC=65 for unequipped circuit (typ=CGB), link 'l1'.
> > > Sep 14 03:07:27 ERROR[5295]: mtp.c:765 timeout_sltm_t1: No SLTA
> > > received within Q.707 timer T1, faulting link on link 'l1'.
> > > Sep 14 03:07:27 WARNING[5295]: chan_ss7.c:3598 monitor_main: MTP is
> > > now DOWN on link 'l1'.
> > > Sep 14 03:07:27 NOTICE[5295]: mtp.c:471 mtp_changeover: MTP changeover
> > > last_ack=7, last_sent=7, from schannel 16, no INSERVICE schannel found
> > > Sep 14 03:07:27 NOTICE[5295]: mtp.c:475 mtp_changeover: Failover not
> > > possible, no other signalling link and no other host available.
> > > Sep 14 03:07:35 NOTICE[5295]: mtp.c:1442 mtp_thread_main: Excessive
> > > poll delay 21373!
> > > Sep 14 03:07:35 NOTICE[5295]: mtp.c:1496 mtp_thread_main: Full Zaptel
> > > input buffer detected, incoming packets may have been lost on link 'l1'.
> > > Sep 14 03:07:35 NOTICE[5295]: mtp.c:1543 mtp_thread_main: Empty Zaptel
> > > output buffer detected, outgoing packets may have been lost on link 'l1'.
> > > Sep 14 03:07:35 NOTICE[5295]: mtp.c:1227 mtp2_read_su: MTP2 CRC error
> > > (CRC=0xfe96 != 0xf0b8) on link 'l1'.
> > > Sep 14 03:07:35 NOTICE[5295]: mtp.c:1442 mtp_thread_main: Excessive
> > > poll delay 13193!
> > > Sep 14 03:07:35 NOTICE[5295]: mtp.c:1496 mtp_thread_main: Full Zaptel
> > > input buffer detected, incoming packets may have been lost on link 'l1'.
> > > Sep 14 03:07:35 NOTICE[5295]: mtp.c:1543 mtp_thread_main: Empty Zaptel
> > > output buffer detected, outgoing packets may have been lost on link 'l1'.
> > > Sep 14 03:07:35 NOTICE[5295]: mtp.c:1442 mtp_thread_main: Excessive
> > > poll delay 14158!
> > > Sep 14 03:07:35 NOTICE[5295]: mtp.c:1496 mtp_thread_main: Full Zaptel
> > > input buffer detected, incoming packets may have been lost on link 'l1'.
> > > Sep 14 03:07:35 NOTICE[5295]: mtp.c:1543 mtp_thread_main: Empty Zaptel
> > > output buffer detected, outgoing packets may have been lost on link 'l1'.
> > > Sep 14 03:07:35 NOTICE[5295]: mtp.c:1221 mtp2_read_su: Short MTP2
> > > frame len 3 < 5 on link 'l1'.
> > > Sep 14 03:07:35 NOTICE[5295]: mtp.c:1442 mtp_thread_main: Excessive
> > > poll delay 13360!
> > > Sep 14 03:07:35 NOTICE[5295]: mtp.c:1496 mtp_thread_main: Full Zaptel
> > > input buffer detected, incoming packets may have been lost on link 'l1'.
> > > Sep 14 03:07:35 NOTICE[5295]: mtp.c:1543 mtp_thread_main: Empty Zaptel
> > > output buffer detected, outgoing packets may have been lost on link 'l1'.
> > > .
> > > .
> > > .
> > > (almost same CLI log as above)
> > > .
> > > .
> > > .
> > > Sep 14 03:07:37 NOTICE[5295]: mtp.c:1442 mtp_thread_main: Excessive
> > > poll delay 3391!
> > > Sep 14 03:07:37 WARNING[5295]: mtp.c:644 mtp2_emon_count_error:
> > > Excessive errors detected in alignment error rate monitor, link failed on
> > > link 'l1'.
> > > Sep 14 03:07:37 NOTICE[5295]: mtp.c:1496 mtp_thread_main: Full Zaptel
> > > input buffer detected, incoming packets may have been lost on link 'l1'.
> > > Sep 14 03:07:37 NOTICE[5295]: mtp.c:1543 mtp_thread_main: Empty Zaptel
> > > output buffer detected, outgoing packets may have been lost on link 'l1'.
> > > ------------------------------(CLI log:
> > > end )---------------------------
> > >
> > > observing this all carefully identifies to us that there is something
> > > wrong with the CRC4 when we try to run it on an SS7 link, because on PRI it
> > > works all okay
> > > moreover it seems that if we enable crc4 in zaptel.conf then the
> > > problem is get caught at the very initial steps by the zaptel driver, thats
> > > why when we disable it then it lets asterisk run successfully & once
> > > chan_ss7.so is loading or loaded, it show the errors(shown in above log)
> > >
> > > we are using:
> > >
> > > FC-4 (kernal-2.6)
> > > Asterisk-1.2.10
> > > zaptel-1.2.7
> > > chan_ss7-0.8.4
> > > (& the SS7-E1 link of the telco do not has any problems as it works
> > > all fine on their own SIP server)
> > >
> > > our configuration: --------zaptel.conf----------
> > > span=1,1,0,ccs,hdb3,crc4
> > > bchan=1-31
> > > loadzone=uk
> > > defaultzone=uk
> > > ---------------------------------
> > >
> > > ----------ss7.conf----------
> > > [linkset-siuc]
> > > enabled=>yes
> > > enable_st=>yes
> > > use_connect=>yes
> > > hunting_policy=>even_mru
> > > subservice=>auto
> > >
> > > [link-l1]
> > > linkset=>siuc
> > > channels=>1-15,17-31
> > > schannels=>16
> > > firstcic=>1
> > > enabled=>yes
> > >
> > > [host-ACDsvr]
> > > enabled=>yes
> > > opc=>0x8e0
> > > dpc=>suic:0x3fff
> > > links=>l1:1
> > > ----------------------------
> > >
> > > any thing wrong with the configuration, concept or etc
> > > plz help in making the Asterisk work with the ss7 E1 link
> > >
> >
> >
> >
> > --
> > |__\__/__| /__/ \__\ |__| \__|
> >
> >
> >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com<http://easynews.com/>--
> >
> > asterisk-ss7 mailing list
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-ss7
> >
> >
> >
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com <http://easynews.com/>--
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
>
>
--
|__\__/__| /__/ \__\ |__| \__|
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20060921/4d28b143/attachment-0001.htm
|