And more
What I do send over SS7
*CLI> --- SS7 Up ---
-- Resetting CICs 1 to 30
-- Executing [0060@ss7_test:1]
Dial("SIP/111-081de268", "ZAP/r3/60") in new stack
-- Called r3/60
-- Zap/1-1 is proceeding passing it to SIP/111-081de268
-- Zap/1-1 answered SIP/111-081de26
and somehow I do receive on the other end an extra "0"
--- SS7 Up ---
-- Resetting CICs 1 to 30
[Sep 18 20:38:36] DEBUG[29244]: chan_zap.c:8339 ss7_linkset:
Got Reset for CICs 1 to 30: Acknowledging
[Sep 18 20:38:36] DEBUG[29244]: chan_zap.c:8344 ss7_linkset:
Got GRA from CIC 1 to 30.
[Sep 18 20:39:05] DEBUG[29244]: chan_zap.c:8348 ss7_linkset:
Got IAM for CIC 1 and number 600
also I'm still very very confuzed regarding GRA - it should
not send Group Reset for whole group - since there is a
signalling timeslot in between! (16)
and still - no audio while it's over chan_ss7 - libss7
regards
anton.
On 18 September 2006 18:05, Anton wrote:
> Got debug - was not cofigured logger.conf properly.
>
> [Sep 18 18:02:08] DEBUG[6238]: chan_zap.c:8339
> ss7_linkset: Got Reset for CICs 1 to 15: Acknowledging
> [Sep 18 18:02:08] DEBUG[6238]: chan_zap.c:8339
> ss7_linkset: Got Reset for CICs 17 to 31: Acknowledging
>
> On 18 September 2006 17:26, Anton wrote:
> > Just compiled the libss7 and interlinked it with
> > chan_ss7 for testing. Following issues arised:
> >
> > Most major - No audio. Channel occupied and so on - but
> > I hear nothing.
> >
> > Unable to properly assign a linkset with single
> > signalling channel (say we have only schannel 16 on
> > first span and no signalling channel on the second
> > span) seems libss7 somehow not properly counting cic's?
> > The following should not happen since 16 is setup as
> > schan
> >
> > Sep 18 17:06:21 NOTICE[17607]: chan_ss7.c:2090
> > handle_GRS_send_hwblock: Got GROUP RESET message,
> > opc=0xd06, dpc=0xd06, sls=0x0, cic=1, range=29.
> > Sep 18 17:06:21 NOTICE[17607]: chan_ss7.c:2121
> > handle_GRS_send_hwblock: Got GRS concerning unequipped
> > CIC 16, discarding.
> > Sep 18 17:06:21 WARNING[17607]: chan_ss7.c:3594
> > monitor_main: MTP is now UP on link 'l1'.
> > Sep 18 17:06:21 WARNING[17607]: chan_ss7.c:3601
> > monitor_main: MTP is now INSERVICE for linkset 'test1'.
> >
> > lib ss7 lacking verbosity in comparision with chan_ss7
> > wich provides quite good feedback, showing what is
> > happening.
> >
> > very few command options. Not found how to see the
> > status of the ss7 link. How is it alligned, what is the
> > sigchannel, which cics are occupied is possible to find
> > only by zap show channels - which is not enough at all.
> >
> > No current state of the CIC
> >
> > Regards,
> > Anton.
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > asterisk-ss7 mailing list
> > To UNSUBSCRIBE or update options visit:
> >
> > http://lists.digium.com/mailman/listinfo/asterisk-ss7
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-ss7 mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-ss7
|