Hello, Something like svn co http://svn.digium.com/svn/libss7/trunk/ libss7-svn svn co http://svn.digium.com/svn/asterisk/team/mattf/asterisk-ss7/ asterisk-ss7-svn You can check/view list of projects available at public Digium's SVN server by visiting link http://svn.digium.com/view/ WBR, Paul. ----- Original Message ----- From: "leonimar cape" <leo_mac_ph@xxxxxxxxx> To: <asterisk-ss7@xxxxxxxxxxxxxxxx> Sent: Tuesday, September 12, 2006 1:14 PM Subject: Re: libss7: Status update (ANSI works!!!!!) > Hi Group, > > Can please somebody give me the link where I can > download the updated asterisk-ss7 and libss7. It seems > that the version I downloaded is not updated or I just > did something wrong. I was able to compile the libss7 > but when I recompile the asterisk using asterisk-ss7, > the chan_zap was not compiled at all. > > I am a little bit lost here, can someone point me to > the right direction > > Regards, > > Mac > > --- Matthew Fredrickson <creslin@xxxxxxxxxx> wrote: > > > Hey all, long time no see, but I just wanted to give > > a status update on > > what is going on with libss7. Last week I was able > > to commit my alarm > > detection code (in case you get an alarm on your > > spans that have > > signalling channels). It should restart the link > > when it comes out of > > alarm fine. I think I need to get some more testing > > in though, since I > > mostly just wrote the code and did very rudimentary > > testing on it. I > > also just added today support in zapata.conf for > > national_spare and > > international_spare networkindicator options in case > > your link uses the > > spare network indicator values (someone on the list > > today had a > > problem with that). > > > > On an entirely different note, I got an ANSI style > > link working this > > week!!!! I didn't ask permission to see if they > > minded being > > mentioned, so I won't mention any names for now, > > however it was a night > > to remember. It was over a 56kbps link channel, > > using an older switch. > > It went surprisingly easier than I thought it > > would. MTP2 was already > > working well, MTP3 only had slight modifications, > > and ISUP had the most > > changes. Other than the fact that I'd never seen a > > 56kbps link > > before. Basically, the difference was that they > > don't use the top bit > > in a DS0 timeslot for HDLC code. So if you want to > > try out libss7 on > > your ANSI link, this is how you do it: > > > > Disclaimer: You have to be using either a TE2xxp or > > TE4xxp for this to > > work, since I used the hardware hdlc features of the > > framer of that > > card to do the 56kbps link. > > > > Get current zaptel-trunk, libss7, and asterisk-ss7 > > from svn (You may > > also have to get libpri, I haven't checked if > > chan_zap compiles cleanly > > without libpri installed) > > Build them, and install them. > > > > If you are using 56kbps links, when you load the > > wct4xxp.ko module, you > > have to pass it the parameter hardhdlcmode=0x7f and > > instead of using > > "dchan" in zaptel.conf for your signalling channel, > > you need to use > > "hardhdlc" on that channel. > > > > In zapata.conf, setup your link following the > > pattern in the sample > > zapata.conf that comes with asterisk-ss7 and set > > your ss7type=ansi. > > That should pretty much be it. All the rest of the > > configuration is > > the same. > > > > As always, if you have any more questions, comments, > > requests, or > > anything else that matter, let me know. I'd love to > > get feedback. > > > > Matthew Fredrickson > > > > _______________________________________________ > > --Bandwidth and Colocation provided by Easynews.com > > -- > > > > asterisk-ss7 mailing list > > To UNSUBSCRIBE or update options visit: > > > > > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > > > > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 >
|