Hi Andre, You need to use the Asterisk trunk; not the asterisk-ss7 one. So everything below is OK, except for the asterisk-bit. Try: svn co http://svn.digium.com/svn/asterisk/trunk asterisk cd asterisk ./configure make make install Good luck! Charl > -----Original Message----- > From: asterisk-ss7-bounces@xxxxxxxxxxxxxxxx > [mailto:asterisk-ss7-bounces@xxxxxxxxxxxxxxxx] On Behalf Of > Andre Luiz Rodrigues > Sent: 30 October 2006 15:34 > To: asterisk-ss7@xxxxxxxxxxxxxxxx > Subject: [asterisk-ss7] Which version I should install of the > asterisk for the roll libss7 ? > > Hi all, > > I am going to install libss7 in my asterisk, but all the > times that I do the installation adapt down: > `svn co http://svn.digium.com/svn/libss7/trunk libss7` `cd > libss7` `make install` > > `svn co http://svn.digium.com/svn/asterisk/team/mattf/asterisk-ss7 > asterisk-ss7` > `cd asterisk-ss7` > ` ./configure` > ` make; make install` > > With himself it do the installation, however apparently the > chan_zap.so is loaded, but not with himself utilize. Even > itself I digitize "CLI> modulate reload chan_zap.so" is shown > myself the reload of the module, by nothing happens. Someone > has some hint of where is the error?? > > > Andre Luiz > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 >
|