Try using the ss7linktest program that is included with libss7. The syntax is "ss7linktest x" where x is the zap channel that your signalling is on. Paste the output of that to your next reply. Matthew Fredrickson On Oct 18, 2006, at 4:58 PM, Jason L. Nesheim wrote: > The link won't actually come up at all. This message scrolls through > asterisk so fast that it's impossible to do anything in the CLI when I > start it. The odd part is that now that I downloaded the latest 1.4 > beta 2 zaptel and installed that and rebooted the box it seems that > the messages have stopped but now asterisk is doing nothing at all > with the SS7. No messages appear in the logs relating to it and my > CopperCom sits in an activating state on the f-link. The config is > the same as before, any ideas? > > -----Original Message----- > From: asterisk-ss7-bounces@xxxxxxxxxxxxxxxx > [mailto:asterisk-ss7-bounces@xxxxxxxxxxxxxxxx] On Behalf Of Matthew > Fredrickson > Sent: Wednesday, October 18, 2006 2:15 PM > To: asterisk-ss7@xxxxxxxxxxxxxxxx > Subject: Re: [asterisk-ss7] ANSI SS7 > > Unless you're seeing link related problems (link doesn't come up and > those are scrolling continuously) you shouldn't worry about those > messages. MTP2 is designed to work around link layer hickups such as > this. You may see better performance though if you set your dchan to > hardhdlc instead (though that only works on the TE4xxp and TE2xxp). > > Matthew Fredrickson > > On Oct 18, 2006, at 12:07 PM, Jason L. Nesheim wrote: > >> I'm getting a strange error when I start up asterisk and I can't tell >> if it's a problem with the ss7 linkset or something hardware related. >> ? >> This is what asterisk outputs: >> [Oct 18 12:02:16] ERROR[7160]: chan_zap.c:8273 ss7_linkset: HDLC >> Abort! >> ? >> This is the SS7 part of my Zapata.conf: >> ? >> signalling = ss7 >> ? >> ss7type = ansi >> ? >> linkset = 1 >> ? >> pointcode = 351400 >> ? >> adjpointcode = 351240 >> ? >> defaultdpc = 351240 >> ? >> networkindicator=national >> ? >> cicbeginswith = 1001 >> sigchan = 1 >> channel = 2-24?????????????? >> ? >> This is from my zaptel.conf: >> ? >> span=1,1,0,esf,b8zs >> bchan=2-24 >> dchan=1???? >> defaultzone=us > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7
|