Dear sir, I have configured as u written to me but iam getting this messages can u please help me sir .my orgination point code is 124 and destination point code is 31 and 32 in decimal in HEX 0-15-4 and 0-3-7 , 0-4-0.If u dont mind can please guide me sir [Oct 7 17:51:39] ERROR[1599]: chan_zap.c:8711 zt_ss7_error: !! Unable to handle SIG_NET_MNG message with H1 = 1 and H0 = 4 [Oct 7 17:51:39] ERROR[1599]: chan_zap.c:8711 zt_ss7_error: Received error from mtp3 layer: -1 [Oct 7 17:51:39] ERROR[1598]: chan_zap.c:8711 zt_ss7_error: !! Unable to handle SIG_NET_MNG message with H1 = 1 and H0 = 4 [Oct 7 17:51:39] ERROR[1598]: chan_zap.c:8711 zt_ss7_error: Received error from mtp3 layer: -1 [Oct 7 17:51:39] ERROR[1599]: chan_zap.c:8711 zt_ss7_error: !! Unable to handle SIG_NET_MNG message with H1 = 1 and H0 = 4 [Oct 7 17:51:39] ERROR[1599]: chan_zap.c:8711 zt_ss7_error: Received error from mtp3 layer: -1 [Oct 7 17:51:39] ERROR[1598]: chan_zap.c:8711 zt_ss7_error: !! Unable to handle SIG_NET_MNG message with H1 = 1 and H0 = 4 [Oct 7 17:51:39] ERROR[1598]: chan_zap.c:8711 zt_ss7_error: Received error from mtp3 layer: -1 --- SS7 Up --- [Oct 7 17:51:39] ERROR[1599]: chan_zap.c:8711 zt_ss7_error: -- !! Unable to handle SIG_NET_MNG message with H1 = 1 and H0 = 4 Resetting CICs 1 to 15 [Oct 7 17:51:39] ERROR[1599]: chan_zap.c:8711 zt_ss7_error: -- Received error from mtp3 layer: -1 Resetting CICs 17 to 62 --- SS7 Up --- -- Resetting CICs 63 to 77 -- Resetting CICs 79 to 124 regards surender On 29/09/06, Matthew Fredrickson <creslin@xxxxxxxxxx> wrote: > > There already is a zapata.conf sample config. You included it in your > reply. The zaptel.conf is setup just like you setup your PRI, with > your bearers setup as bchans and your signalling channel(s) as dchan. > > For an F-link, with one signalling channel zaptel.conf would look > something like this (for the channel layout) > > bchan=1-15 > dchan=16 > bchan=17-31 > > Your zapata.conf would looks something like this: > signalling=ss7 > ss7type=itu > ; which linkset all of these options apply to > linkset=1 > ; This is your point code > pointcode=1111 > ; This is the pointcode that your ISUP messages are sent to > defaultdpc=2222 > ; This is the pointcode of the node adjacent to this link > adjpointcode=2222 > ; This is the channel number of your signalling channel (your dchan > option in zaptel.conf > sigchan=16 > ; Context calls will come into > context=ss7 > ; This will map Zap/1-15 as CICs 1-15 > cicbeginswith=1 > channel=1-15 > ; This will map Zap/17-31 as CICs 17-31 > cicbeginswith=17 > channel=17-31 > > To do it with another linkset, just duplicate all of the above, but > just change linkset=2 and set your options for that linkset. > > Matthew Fredrickson > > > On Sep 29, 2006, at 1:49 PM, Mr.Surender Reddy wrote: > > > Dear sir, > > If you dont mind can u please give me a sample conf file > > like what Chanss7 people give in their list If u can add somthing like > > that .So that it will be easy for many to try this new development. > > > > regards > > surender > > > > > > On 29/09/06, Matthew Fredrickson <creslin@xxxxxxxxxx> wrote: It looks > > like you're trying to terminate 2 linksets on one machine. > >> Just set it up so that you have two linksets in zapata.conf.You > >> can't > >> do comma separation for your sigchan and defaultdpc.You have to > >> declare those one at a time.Also, your zaptel.conf needs to have > >> your > >> signalling channel set to be dchan (or hardhdlc if you're using a card > >> that supports it). > >> > >> Matthew Fredrickson > >> > >> On Sep 29, 2006, at 3:09 AM, Mr.Surender Reddy wrote: > >> > >> > Dear Matthew, > >> > I Thankx for our Intrest to help me out in > >> > this.Below are the Details which iam using for Chanss7 .But i want > >> to > >> > try Libss7 Please help me out. > >> > > >> > ss7.conf of Chanss7 > >> > > >> > > >> > > >> > [linkset-Ts1] > >> > > >> > enabled => yes > >> > > >> > enable_st => yes > >> > > >> > use_connect => yes > >> > > >> > hunting_policy => seq_htl > >> > > >> > context => ss7 > >> > > >> > subservice => 8 > >> > > >> > [linkset-Ts2] > >> > > >> > enabled => yes > >> > > >> > enable_st => yes > >> > > >> > use_connect =>yes > >> > > >> > hunting_policy => seq_htl > >> > > >> > context => ss7 > >> > > >> > subservice => 8 > >> > > >> > [link-l1] > >> > > >> > linkset => Ts1 > >> > > >> > channels => 1-15,17-31 > >> > > >> > schannel => 16 > >> > > >> > firstcic => 1 > >> > > >> > enabled => yes > >> > > >> > [link-l2] > >> > > >> > linkset => Ts1 > >> > > >> > channels => 1-31 > >> > > >> > schannel => > >> > > >> > firstcic => 33 > >> > > >> > enabled => YES > >> > > >> > [link-l3] > >> > > >> > linkset => Ts2 > >> > > >> > channels =>1-15,17-31 > >> > > >> > schannel => 16 > >> > > >> > firstcic => 1 > >> > > >> > enabled => yes > >> > > >> > [link-l4] > >> > > >> > linkset => Ts2 > >> > > >> > channels => 1-31 > >> > > >> > schannel => > >> > > >> > firstcic => 33 > >> > > >> > enabled => YES > >> > > >> > [host-localhost.localdomain] > >> > > >> > enabled => yes > >> > > >> > default_linkset => Ts2 > >> > > >> > opc => 124 > >> > > >> > dpc => Ts1:31,Ts2:32 > >> > > >> > links => l1:1,l2:2,l3:3,l4:4 > >> > This is the zaptel.conf > >> > > >> > > >> > > >> > span=1,0,0,ccs,hdb3 > >> > > >> > bchan = 1-31 > >> > > >> > span=2,0,0,ccs,hdb3 > >> > > >> > bchan=32-62 > >> > > >> > span=3,0,0,ccs,hdb3 > >> > > >> > bchan=63-93 > >> > > >> > span=4,1,0,ccs,hdb3 > >> > > >> > bchan=94-124 > >> > > >> > > >> > loadzone = us > >> > > >> > defaultzone = us > >> > I have compiled the Libss7 and tried to use that but iam unable to > >> use > >> > that as Zapta.conf i couldnt configure fine i tired this way i dont > >> > think that is correct Can u please see this Zapta.conf which i > >> wanted > >> > to use for libss7 > >> > > >> > > >> > Signaling type SS7 > >> > signalling = ss7 > >> > > >> > ; Variant of SS7 signaling: > >> > ; Options are itu and ansi > >> > ss7type = itu > >> > > >> > ; All settings apply to linkset 1 > >> > linkset = 1 > >> > > >> > ; Point code of the linkset > >> > pointcode = 124 > >> > > >> > ; Point code of node adjacent to this signaling link (Possibly the > >> STP > >> > between you and > >> > ; your destination) > >> > adjpointcode = 31,32 > >> > > >> > ; Default point code that you would like to assign to outgoing > >> > messages (in case of > >> > ; routing through STPs, or using A links) > >> > defaultdpc = 31,32 > >> > > >> > ; Begin CIC (Circuit indication codes) count with this number > >> > cicbeginswith = 1 > >> > > >> > ; What the MTP3 network indicator bits should be set to. Choices > >> are > >> > ; national, national_spare, international, international_spare > >> > networkindicator=national > >> > > >> > ; First signaling channel > >> > sigchan = 16 > >> > > >> > ; Channels to associate with CICs on this linkset > >> > channel = 25-47 > >> > regards > >> > surender > >> > > >> > > >> > On 28/09/06, Matthew Fredrickson < creslin@xxxxxxxxxx> wrote: What > >> is > >> > the layout of your spans (which channel is the signalling > >> >> channel on) and what is your layout of your CICs ( i.e. what > >> channels > >> >> map to which CICs).After you find that out post your zaptel.conf > >> and > >> >> zapata.conf and we'll see if we can sort it out. > >> >> > >> >> Matthew Fredrickson > >> >> > >> >> On Sep 28, 2006, at 1:49 AM, Mr.Surender Reddy wrote: > >> >> > >> >> > HI Matthew, > >> >> > Iam using Chanss7 i would like to test Libss7 iam > >> >> > unable to configure my SS7 channels with this version I have two > >> ss7 > >> >> > Links i would like to test both on this machine.How can i do this > >> >> can > >> >> > u please guide me if u dont mind. > >> >> > > >> >> > regards > >> >> > surender > >> >> > > >> >> > > >> >> > On 27/09/06, Matthew Fredrickson < creslin@xxxxxxxxxx> wrote: > >> >> >> On Sep 26, 2006, at 9:44 PM, Rob Hillis wrote: > >> >> >> > >> >> >> >> Also, you may want to get asterisk trunk as well, since > >> >> >> >> that I merged in all the libss7 changes from the asterisk-ss7 > >> >> >> branch > >> >> >> >> into asterisk-trunk. (svn co > >> >> >> http://svn.digium.com/svn/asterisk/trunk > >> >> >>>> asterisk-trunk) > >> >> >> > > >> >> >> > > >> >> >> > So does this mean that the asterisk-ss7 branch is no longer > >> under > >> >> >> > development and all future changes are going to be made to the > >> >> >> Asterisk > >> >> >> > trunk?Should I be looking at moving from the asterisk-ss7 > >> branch > >> >> >> to > >> >> >> > the > >> >>>> > main asterisk trunk? > >> >> >> > >> >> >> For the time being, yes, that would probably be a good idea.I > >> think > >> >> >> I > >> >> >> may re-branch the asterisk-ss7 branch whenever the 1.4 release > >> >> comes > >> >> >> out though and backport the changes in trunk to the 1.4 based > >> ss7 > >> >> >> branch. > >> >> > >> >> _______________________________________________ > >> >> --Bandwidth and Colocation provided by Easynews.com -- > >> >> > >> >> asterisk-ss7 mailing list > >> >> To UNSUBSCRIBE or update options visit: > >> >> http://lists.digium.com/mailman/listinfo/asterisk-ss7 > >> > _______________________________________________ > >> > --Bandwidth and Colocation provided by Easynews.com -- > >> > > >> > asterisk-ss7 mailing list > >> > To UNSUBSCRIBE or update options visit: > >> >http://lists.digium.com/mailman/listinfo/asterisk-ss7 > >> > >> _______________________________________________ > >> --Bandwidth and Colocation provided by Easynews.com -- > >> > >> asterisk-ss7 mailing list > >> To UNSUBSCRIBE or update options visit: > >> http://lists.digium.com/mailman/listinfo/asterisk-ss7 > > _______________________________________________ > > --Bandwidth and Colocation provided by Easynews.com -- > > > > asterisk-ss7 mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-ss7/attachments/20061007/24d0e5f8/attachment.htm