Have you run an ISDN link on the same hardware before ? Any HDLC Abort errors back then ? I jumped chan_ss7 when I heard of HARDHDLC (hardware HDLC), I'm using it now and all my HDLC Abort errors are gone. I strongly sugest the chan_ss7 people to go back to using Digium HDLC support so we can use HARDHDLC. Just my $0.02. > Hi all, > I have tested chan_ss7 interconnecting two asterisk boxes. Server > A and Server B > > The alignment work fine, CGB & CGU as well. > > I have done a test, generating .call files on > /var/spool/asterisk/outgoing/ on server A in order to dial out towards > server B. On Server B side, when calls arrive it execute a stream_file > from a perl AGI script. > > > I've tested with just 60 channels, and even when the 60 channels are > not fully used, appears too much "mtp.c: MTP2 bitstream frame format > error, entering octet counting mode..." and after that some of these > messages, the link goes down. > > Up to now, I have not found where the stream is bad formed. > > Another test I have done is, for each .call created, I wait 1 second > before create the next one, and with this way, it work fine. > > Can some body explain this issue ? > > > It seems that when there are a lot of calls together at the same time, > the HDLC of the Digium TE410P card can't proccess correctly the bit > streams.. or I'm wrong ? > > Robert > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > -- Regards, Marcelo Pacheco Technology & Systems Director - FaleVOIP Telecom Com: (27)2127-9791 Cel: (27)9945-3993 Fax: (27)2127-9799 E-mail: marcelo@xxxxxxxxxxxx MSN: marcelo@xxxxxxxxxxxx / marcelo@xxxxxxxxxxx Site: www.falevoip.net
|