Hi, I am not sure if this has a bearing, but try converting your point codes to hexadecimal format. Hope this helps. --- ADEGOKE ARUNA <goksie@xxxxxxxxx> wrote: > Dear all, > > I realise this list is for the expert, however, you > can make me an expert > too when you find time to help me out. > > Can somebody give me a working ss7.conf? > I have a 4 E1 to my provider (using Alcatel s12) and > I have only one > signaling link. > > The opc and dpc are in decimal. > Each time I run the asterisk it gives errors below > > == Parsing '/etc/asterisk/ss7.conf': Found > Mar 17 13:06:35 NOTICE[5196]: config.c:318 > load_config_linkset: Using > default context 'default' for linkset 'siuc' > Mar 17 13:06:35 NOTICE[5196]: config.c:320 > load_config_linkset: Using > default language '' for linkset 'siuc' > Mar 17 13:06:35 NOTICE[5196]: config.c:463 > load_config_link: Configured link > 'l1' on linkset 'siuc', firstcic=1 > Mar 17 13:06:35 NOTICE[5196]: config.c:463 > load_config_link: Configured link > 'l2' on linkset 'siuc', firstcic=33 > Mar 17 13:06:35 NOTICE[5196]: config.c:463 > load_config_link: Configured link > 'l3' on linkset 'siuc', firstcic=65 > Mar 17 13:06:35 NOTICE[5196]: config.c:463 > load_config_link: Configured link > 'l4' on linkset 'siuc', firstcic=97 > Mar 17 13:06:35 WARNING[5196]: config.c:622 > load_config_host: Missing > interface entries for host 'WIRELESS2'. > Mar 17 13:06:35 NOTICE[5196]: config.c:772 > load_config: Configuring DPC 60 > for linkset 'siuc'. > Mar 17 13:06:36 WARNING[5196]: chan_ss7.c:4285 > setup_cic: Failure in > ZT_SPECIFY for circuit 1: Device or resource busy. > Mar 17 13:06:36 WARNING[5196]: loader.c:414 > __load_resource: chan_ss7.so: > load_module failed, returning -1 > -- SS7 channel unloaded. > Mar 17 13:06:36 WARNING[5196]: loader.c:554 > load_modules: Loading module > chan_ss7.so failed! > > > Ss7.conf is as below > [linkset-siuc] > enabled => yes > enable_st => no > use_connect => yes > hunting_policy => even_mru > subservice => auto > > [link-l1] > linkset => siuc > channels => 1-15,17-31 > schannel => 16 > firstcic => 1 > enabled => yes > > [link-l2] > linkset => siuc > channels => 1-31 > schannel => > firstcic => 33 > enabled => yes > > [link-l3] > linkset => siuc > channels => 1-31 > schannel => > firstcic => 65 > enabled => yes > > [link-l4] > linkset => siuc > channels => 1-31 > schannel => > firstcic => 97 > enabled => yes > > [host-WIRELESS2] > enabled => yes > opc => 900 > dpc => siuc:60 > links => l1:1,l2:2,l3:3,l4:4 > > I am using sangoma A104D which I confirmed from them > and the sangoma said it > works with chan_ss7. > > Can someone help out? > > > > goksie > > > > From: asterisk-ss7-bounces@xxxxxxxxxxxxxxxx > [mailto:asterisk-ss7-bounces@xxxxxxxxxxxxxxxx] On > Behalf Of Jacob Tinning > Sent: Thursday, March 16, 2006 3:25 PM > To: asterisk-ss7@xxxxxxxxxxxxxxxx > Subject: Re: [asterisk-ss7] My experiences with > chan_ss7. > > On Thu, 16 Mar 2006, Kai Militzer wrote: > > > Now something different that came to my mind right > now. As I said in my > > first posting I have E1 in use right now. I only > use one signaling link > > on the first E1 right now. Nevertheless I had to > define a signaling link > > on the second E1 even if I don't use it. > > You don't need to do that. You can make your > ss7.conf look like this: > > ; First E1 with signalling on timeslot 16 > [link-l1] > channels => 1-15,17-31 > schannel => 16 > firstcic => 1 > > ; Second E1 with no signalling and audio on 31 > timeslots. > [link-l2] > channels => 1-31 > schannel => > firstcic => 33 > > > So I give away one channel I could use for voice. > For four E1 it would > > be already three channels not usable. > > Yeah. It would be a shame to have unused timeslots > on an E1. fortunately you > can avoid this :) > > Mvh. Jacob > > -- > Jacob Tinning > System Developer > SIFIRA A/S > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com > -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com > -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
|