Dear all,
Can somebody give me a working ss7.conf?
I have a 4 E1 to my provider (Alcatel s12) and I want only one signaling
link.
The opc and dpc are in decimal.
Each time I run the asterisk it gives errors below
== Parsing '/etc/asterisk/ss7.conf': Found
Mar 17 13:06:35 NOTICE[5196]: config.c:318 load_config_linkset: Using
default context 'default' for linkset 'siuc'
Mar 17 13:06:35 NOTICE[5196]: config.c:320 load_config_linkset: Using
default language '' for linkset 'siuc'
Mar 17 13:06:35 NOTICE[5196]: config.c:463 load_config_link: Configured link
'l1' on linkset 'siuc', firstcic=1
Mar 17 13:06:35 NOTICE[5196]: config.c:463 load_config_link: Configured link
'l2' on linkset 'siuc', firstcic=33
Mar 17 13:06:35 NOTICE[5196]: config.c:463 load_config_link: Configured link
'l3' on linkset 'siuc', firstcic=65
Mar 17 13:06:35 NOTICE[5196]: config.c:463 load_config_link: Configured link
'l4' on linkset 'siuc', firstcic=97
Mar 17 13:06:35 WARNING[5196]: config.c:622 load_config_host: Missing
interface entries for host 'WIRELESS2'.
Mar 17 13:06:35 NOTICE[5196]: config.c:772 load_config: Configuring DPC 60
for linkset 'siuc'.
Mar 17 13:06:36 WARNING[5196]: chan_ss7.c:4285 setup_cic: Failure in
ZT_SPECIFY for circuit 1: Device or resource busy.
Mar 17 13:06:36 WARNING[5196]: loader.c:414 __load_resource: chan_ss7.so:
load_module failed, returning -1
-- SS7 channel unloaded.
Mar 17 13:06:36 WARNING[5196]: loader.c:554 load_modules: Loading module
chan_ss7.so failed!
Ss7.conf is as below
[linkset-siuc]
enabled => yes
enable_st => no
use_connect => yes
hunting_policy => even_mru
subservice => auto
[link-l1]
linkset => siuc
channels => 1-15,17-31
schannel => 16
firstcic => 1
enabled => yes
[link-l2]
linkset => siuc
channels => 1-31
schannel =>
firstcic => 33
enabled => yes
[link-l3]
linkset => siuc
channels => 1-31
schannel =>
firstcic => 65
enabled => yes
[link-l4]
linkset => siuc
channels => 1-31
schannel =>
firstcic => 97
enabled => yes
[host-WIRELESS2]
enabled => yes
opc => 900
dpc => siuc:60
links => l1:1,l2:2,l3:3,l4:4
I am using sangoma A104D which I confirmed from them and the sangoma said it
works with chan_ss7.
Can someone help out?
goksie
-----Original Message-----
From: asterisk-ss7-bounces@xxxxxxxxxxxxxxxx
[mailto:asterisk-ss7-bounces@xxxxxxxxxxxxxxxx] On Behalf Of Jacob Tinning
Sent: Thursday, March 16, 2006 3:25 PM
To: asterisk-ss7@xxxxxxxxxxxxxxxx
Subject: Re: My experiences with chan_ss7.
On Thu, 16 Mar 2006, Kai Militzer wrote:
> Now something different that came to my mind right now. As I said in my
> first posting I have E1 in use right now. I only use one signaling link
> on the first E1 right now. Nevertheless I had to define a signaling link
> on the second E1 even if I don't use it.
You don't need to do that. You can make your ss7.conf look like this:
; First E1 with signalling on timeslot 16
[link-l1]
channels => 1-15,17-31
schannel => 16
firstcic => 1
; Second E1 with no signalling and audio on 31 timeslots.
[link-l2]
channels => 1-31
schannel =>
firstcic => 33
> So I give away one channel I could use for voice. For four E1 it would
> be already three channels not usable.
Yeah. It would be a shame to have unused timeslots on an E1. fortunately you
can avoid this :)
Mvh. Jacob
--
Jacob Tinning
System Developer SIFIRA A/S
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
|