Try to use kernel 2.6.15.5 and try to play with TE410P settings - I had the same with Sangoma in few different cases - but now it runs. Sifira guys as I know uses Digium hardware for ss7 Do you use g729 codec? When you'll succeed running SS7 please let us know about audio lost messages - It's a problem why I can't run SS7 driver right now. Audio is glitchy because of it... But you may not meet that problem. On 15 March 2006 14:13, Artur Dziak wrote: > Hi. > I have little question. > Run anybody Digium TE410P and chan_ss7 with Siemens EWSD? > > I have a problem. > Layer 1of ss7 run good, but upper layers dont' run. > In logs i see: > > Mar 15 09:54:13 NOTICE[26590] mtp.c: MTP2 bitstream frame > format error, entering octet counting mode on link 'l1'. > > (762 or 763 times per second) > > I read faq for ss7. IRQs its OK. Line have one week > tests. Tests was passed. Is this possible to run te410 > with siemens ewsd? > > Machine: PIV with 1GB RAM > chan_ss7 ver. 0.82 > zaptel driver 1.2.3 > asterisk 1.2.4 > kernel 2.6.9.22 > Line e1 with ss7 signalling. > > Regards > Bulo > > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7