On Mon, 2006-06-26 at 19:51 +0530, Mr.Surender Reddy wrote: > Dear sir, > Thankx for the Mail.I have built with asterisk with > jitter buffer patch for 1.2.9 for the latest one there was no change > it was the same.But when u said me to compile with chan_ss7 with > -DAST_JB added to the CFLAGS of the chan_ss7 Makefile if you have > built Asterisk 1.2.x with the jitterbuffer patch applied this is not > clear for me to If you have built & installed asterisk 1.2.9 *with* the jitterbuffer patch then I think you need to add -DAST_JB to the CFLAGS in the Makefile of chan_ss7 and rebuild and install it. If you *don't* use the jitterbuffer patch with asterisk 1.2.9 then you do *not* need to add -DAST_JB to the CFLAGS of the chan_ss7 Makefile. Hope this is clearer now. > Check it sir.As per my application we have Dell Power Edge with Digium > card the server has 8 Gbram and Dual processor with Raid 5 . Make sure that the Digium card is on it's own interrupt and that the Digium card is *not sharing* an interrupt with something else. I think there is background information about this on www.asteriskguru.com > We are using the SS7 with asterisk for my calling cards business > sir.People are not buying the cards because of the Audio lost or > gichhy problem of audio.we are using Completely Sip platfrom sir.If u > can make the things little easy that would be fine for me sir i hope u > will not mind in making the things clear. If you continue to have these problems I suggest you hire a local Asterisk consultant to help you find and hopefully fix the problems. Regards, Patrick
|