You should read the manual. You have to point where is your asterisk and zaptel sources are. Everything is in readme. On 10 June 2006 17:25, Mr.Surender Reddy wrote: > Dear sir, > This is the problem iam getting when iam > trying to install the new version of ss7. > can u plz guide me to install. > [root@localhost chan_ss7-0.8.4]# make > gcc -c -g -pipe -Wall -Wstrict-prototypes > -Wmissing-prototypes -Wmissing-declarations -D_REENTRANT > -D_GNU_SOURCE -DPIC -fpic -o cluster.o cluster.c > gcc -c -g -pipe -Wall -Wstrict-prototypes > -Wmissing-prototypes -Wmissing-declarations -D_REENTRANT > -D_GNU_SOURCE -DPIC -fpic -o config.o config.c > gcc -c -g -pipe -Wall -Wstrict-prototypes > -Wmissing-prototypes -Wmissing-declarations -D_REENTRANT > -D_GNU_SOURCE -DPIC -fpic -o chan_ss7.o chan_ss7.c > chan_ss7.c:57:20: zaptel.h: No such file or directory > chan_ss7.c: In function `ss7_new': > chan_ss7.c:631: error: `ZT_FLUSH_ALL' undeclared (first > use in this function) > chan_ss7.c:631: error: (Each undeclared identifier is > reported only once chan_ss7.c:631: error: for each > function it appears in.) chan_ss7.c:632: error: > `ZT_FLUSH' undeclared (first use in this function) > chan_ss7.c: In function `ss7_send_digit': > chan_ss7.c:725: error: `ZT_DIAL_OPERATION' undeclared > (first use in this function) > chan_ss7.c:725: error: syntax error before "zo" > chan_ss7.c:730: error: `zo' undeclared (first use in this > function) chan_ss7.c:730: error: `ZT_DIAL_OP_APPEND' > undeclared (first use in this function) > chan_ss7.c:734: error: `ZT_DIAL' undeclared (first use in > this function) chan_ss7.c: In function > `ss7_handle_event': > chan_ss7.c:1868: error: `ZT_EVENT_DIALCOMPLETE' > undeclared (first use in this function) > chan_ss7.c:1871: error: `ZT_DIALING' undeclared (first > use in this function) chan_ss7.c: In function > `get_zaptel_event': > chan_ss7.c:1896: error: `ZT_GETEVENT' undeclared (first > use in this function) > chan_ss7.c: In function `ss7_read': > chan_ss7.c:1942: error: `ELAST' undeclared (first use in > this function) chan_ss7.c: In function `ss7_exception': > chan_ss7.c:2049: error: `ZT_GETEVENT' undeclared (first > use in this function) > chan_ss7.c: In function `zt_enable_ec': > chan_ss7.c:2409: error: `ZT_AUDIOMODE' undeclared (first > use in this function) > chan_ss7.c:2414: error: `ZT_ECHOCANCEL' undeclared (first > use in this function) > chan_ss7.c:2422: error: `ZT_ECHOTRAIN' undeclared (first > use in this function) > chan_ss7.c: In function `zt_disable_ec': > chan_ss7.c:2439: error: `ZT_ECHOCANCEL' undeclared (first > use in this function) > chan_ss7.c: In function `continuity_check_thread_main': > chan_ss7.c:3691: error: `ELAST' undeclared (first use in > this function) chan_ss7.c: In function `setup_cic': > chan_ss7.c:4500: error: `ZT_BUFFERINFO' undeclared (first > use in this function) > chan_ss7.c:4500: error: syntax error before "bi" > chan_ss7.c:4526: error: `ZT_SPECIFY' undeclared (first > use in this function) chan_ss7.c:4531: error: > `ZT_LAW_ALAW' undeclared (first use in this function) > chan_ss7.c:4532: error: `ZT_SETLAW' undeclared (first use > in this function) chan_ss7.c:4537: error: `bi' undeclared > (first use in this function) chan_ss7.c:4537: error: > `ZT_POLICY_IMMEDIATE' undeclared (first use in this > function) > chan_ss7.c:4541: error: `ZT_SET_BUFINFO' undeclared > (first use in this function) > chan_ss7.c:4547: error: `ZT_SET_BLOCKSIZE' undeclared > (first use in this function) > make: *** [chan_ss7.o] Error 1 > > regards > surender > > On 6/8/06, Mr.Surender Reddy <gvsurenderreddy@xxxxxxxxx> wrote: > > Dear sir , > > When iam making the new SS7 iam getting > > errors sir can u pplz help us. > > > > regards > > surender > > > > On 6/7/06, Anders Baekgaard <ab@xxxxxxxxxx> wrote: > > > An updated version of chan_ss7 for asterisk has been > > > released as version 0.8.4. This version has been > > > tested against asterisk version 1.2.9.1. > > > > > > > > > From the README: > > > - Fixed crash when T1 expires > > > - Made check on audio read to detect underruns > > > - Fixed crash in process_acm > > > - Changed priority for continuity check thread > > > - Fixed crash in CLI command block/unblock > > > - Fixed CLI command output: "Unknown state: 3" > > > - Listen on cluster socket only when there are other > > > cluster nodes configured > > > - Port for TCP connection in cluster now configurable > > > - Use of ast_setstate to report channel state changes > > > - New per link config options to enable echo > > > cancellation in Zaptel driver > > > - New CIC hunting policies: sequential low-to-high > > > and sequential high-to-low > > > > > > Additional information and the source of chan_ss7 can > > > be found at http://www.sifira.dk/chan-ss7. > > > > > > Best regards, > > > Anders Baekgaard > > > _______________________________________________ > > > --Bandwidth and Colocation provided by > > > Easynews.com<http://easynews.com/>-- > > > > > > asterisk-ss7 mailing list > > > To UNSUBSCRIBE or update options visit: > > > > > > http://lists.digium.com/mailman/listinfo/asterisk-ss7
|