I don't think this will work, since W03 know nothing about signalling channel. Though I'll try it On 13 December 2006 18:25, asterisk@xxxxxxxxx wrote: > I think there is no need to configure a second linkset on > the carrier side, you can use the Signalling channel of > the first link and only use other CIC, that must be > possible, in the next 3 weeks i will make a configuration > like this. after this time i can give you news about > this, but ofcourse thats to long for you.!? > > i think a configuration like this should work: > > [linkset-W05] > enabled => yes > enable_st => no > use_connect => yes > hunting_policy => seq_lth > context => ss7 > language => da > t35 => 15000,timeout > subservice => auto > > [linkset-W03] > enabled => yes > enable_st => no > use_connect => yes > hunting_policy => even_mru > context => W03 > language => de > t35 => 15000,timeout > subservice => auto > > > [link-l1] > linkset => W05 > channels => 2-31 > schannel => 1 > firstcic => 0 > enabled => yes > echocancel => no > echocan_train => 350 > echocan_taps => 128 > > [link-l2] > linkset => W03 > channels => 1-31 > schannel => > firstcic => 31 > enabled => yes > > [host-srv25] > enabled => yes > default_linkset => W05 > opc => 8802 > dpc => W05:8304,W03,8304 > links => l1:1,l2:2 > > On Wed, 13 Dec 2006, Marc Storck wrote: > > See the Thread: [asterisk-ss7] Some Feature-Questions > > > > It does not work for everybody, as the carrier on the > > other side probably doesn't want or is unable to > > configure 2 linksets. > > > > I can only welcome Anton's idea. > > > > Best regards, > > > > Marc > > > > Vernier Umali wrote: > >> Maybe you could set different linksets for the 2 links > >> and address them accordingly when dialling. > >> > >> On 12/13/06, Anton <anton.vazir@xxxxxxxxx> wrote: > >>> Hi! Have anyone implemented the possibility to chose > >>> a link in linkset to be dialed through? > >>> > >>> For example in configuration > >>> > >>> [linkset1] > >>> > >>> [link-l1] > >>> linkset => linkset1 > >>> > >>> [link-l2] > >>> linkset => linkset1 > >>> > >>> we have 2xE1 configured in the linkset 1 and so > >>> choice of hunting policy is only in high-to -low or > >>> low-to-high or so, BUT if I do need to dial EXACTLY > >>> through [link-l1] or [link-l2] - there is no such a > >>> way. If anyone have and can share a patch - I'll very > >>> appreciate. > >>> > >>> in principle making something like > >>> > >>> [trunkgroup-trunkgroup1] > >>> add_channel => link-l1/1-15,17-31 > >>> add_channel => link-l2/1-31 > >>> > >>> would be great. > >>> > >>> Regards, > >>> Anton. > >>> _______________________________________________ > >>> --Bandwidth and Colocation provided by Easynews.com > >>> -- > >>> > >>> asterisk-ss7 mailing list > >>> To UNSUBSCRIBE or update options visit: > >>> > >>> http://lists.digium.com/mailman/listinfo/asterisk-ss7 > >> > >> _______________________________________________ > >> --Bandwidth and Colocation provided by Easynews.com -- > >> > >> asterisk-ss7 mailing list > >> To UNSUBSCRIBE or update options visit: > >> > >> http://lists.digium.com/mailman/listinfo/asterisk-ss7 > > > > _______________________________________________ > > --Bandwidth and Colocation provided by Easynews.com -- > > > > asterisk-ss7 mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-ss7 > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7
|