Thanks for the comment, the same has been proposed in thread "[asterisk-ss7] Some Feature-Questions" and it does not work, at least not for me. I can provide my config file again if this of any help. Regards, Marc asterisk@xxxxxxxxx wrote: > > I think there is no need to configure a second linkset on the carrier > side, you can use the Signalling channel of the first link and only use > other CIC, that must be possible, in the next 3 weeks i will make a > configuration like this. after this time i can give you news about this, > but ofcourse thats to long for you.!? > > i think a configuration like this should work: > > [linkset-W05] > enabled => yes > enable_st => no > use_connect => yes > hunting_policy => seq_lth > context => ss7 > language => da > t35 => 15000,timeout > subservice => auto > > [linkset-W03] > enabled => yes > enable_st => no > use_connect => yes > hunting_policy => even_mru > context => W03 > language => de > t35 => 15000,timeout > subservice => auto > > > [link-l1] > linkset => W05 > channels => 2-31 > schannel => 1 > firstcic => 0 > enabled => yes > echocancel => no > echocan_train => 350 > echocan_taps => 128 > > [link-l2] > linkset => W03 > channels => 1-31 > schannel => > firstcic => 31 > enabled => yes > > [host-srv25] > enabled => yes > default_linkset => W05 > opc => 8802 > dpc => W05:8304,W03,8304 > links => l1:1,l2:2 > > > > On Wed, 13 Dec 2006, Marc Storck wrote: > >> See the Thread: [asterisk-ss7] Some Feature-Questions >> >> It does not work for everybody, as the carrier on the other side >> probably doesn't want or is unable to configure 2 linksets. >> >> I can only welcome Anton's idea. >> >> Best regards, >> >> Marc >> >> Vernier Umali wrote: >>> Maybe you could set different linksets for the 2 links and address >>> them accordingly when dialling. >>> >>> On 12/13/06, Anton <anton.vazir@xxxxxxxxx> wrote: >>>> Hi! Have anyone implemented the possibility to chose a link >>>> in linkset to be dialed through? >>>> >>>> For example in configuration >>>> >>>> [linkset1] >>>> >>>> [link-l1] >>>> linkset => linkset1 >>>> >>>> [link-l2] >>>> linkset => linkset1 >>>> >>>> we have 2xE1 configured in the linkset 1 and so choice of >>>> hunting policy is only in high-to -low or low-to-high or >>>> so, BUT if I do need to dial EXACTLY through [link-l1] or >>>> [link-l2] - there is no such a way. If anyone have and can >>>> share a patch - I'll very appreciate. >>>> >>>> in principle making something like >>>> >>>> [trunkgroup-trunkgroup1] >>>> add_channel => link-l1/1-15,17-31 >>>> add_channel => link-l2/1-31 >>>> >>>> would be great. >>>> >>>> Regards, >>>> Anton. >>>> _______________________________________________ >>>> --Bandwidth and Colocation provided by Easynews.com -- >>>> >>>> asterisk-ss7 mailing list >>>> To UNSUBSCRIBE or update options visit: >>>> http://lists.digium.com/mailman/listinfo/asterisk-ss7 >>>> >>> _______________________________________________ >>> --Bandwidth and Colocation provided by Easynews.com -- >>> >>> asterisk-ss7 mailing list >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-ss7 >> _______________________________________________ >> --Bandwidth and Colocation provided by Easynews.com -- >> >> asterisk-ss7 mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-ss7 >> > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-ss7
|