Greetings all,
I am trying to connect an AVR programmer to Arch machine. I can't see
it appearing under /dev.
I found the vendor and product ids using lsusb. I think the device is
16c0:05dc:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 058f:9540 Alcor Micro Corp. AU9540 Smartcard Reader
Bus 001 Device 003: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 001 Device 004: ID 13d3:56bc IMC Networks [unknown]
Bus 001 Device 005: ID 06cb:00bd Synaptics, Inc. Prometheus MIS Touch Fingerprint Reader
Bus 001 Device 006: ID 8087:0026 Intel Corp. AX201 Bluetooth
Bus 001 Device 009: ID 16c0:05dc Van Ooijen Technische Informatica shared ID for use with libusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
I added the following to /etc/udev/rules.d/99-avrprogrammer.rules and
restarted the machine:
SUBSYSTEM=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="05dc", GROUP="uucp", MODE=="0666"
I see the following in my dmesg when I insert the programmer:
[ 1526.700607] usb 1-4: new low-speed USB device number 9 using xhci_hcd
[ 1526.849141] usb 1-4: New USB device found, idVendor=16c0, idProduct=05dc, bcdDevice= 1.04
[ 1526.849152] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1526.849156] usb 1-4: Product: USBasp
[ 1526.849159] usb 1-4: Manufacturer: www.fischl.de
I'm checking the device by doing something like
ls /dev > before_plugging_in_programmer
ls /dev > after_plugging_in_programmer
vimdiff before_plugging_in_programmer after_plugging_in_programmer
--
Regards,
Sadeep
PGP: 103BF9E3E750BF7E
