On 02-01-2023 15:22, Polarian wrote:
Hello,
So my friend is trying to install Arch Linux, and he has ran into an
issue I can not find a solution to, the Arch Threads on this issue has
the typical "Fixed" one word solution, which doesn't ever explain HOW
they fixed it.
Does anyone know what causes this following error:
/dev/disk/by-label/ARCH_202212 device did not show up after 30 seconds.
This is after booting to the USB stick and then the grub bootloader,
but when attempting to boot to the Arch Installation media the error
above occurs.
I have tried it with the latest archiso 202301 and it had the same
issue, so that is why I tried to use the last version (which I used to
install Arch Linux on one of my personal devices, thus I know the iso
works) but yet the same issue still occurs.
I got a feeling its the flashing tool which is the issue, I always use
dd on linux, but my friend uses windows and he has tried both rufus
and balena etcher, both of which have the same exact issue. He has
cleaned the USB stick using diskpart (wipe partitions) to ensure that
the USB is completely clean before flashing to see if that was an
issue, same issue still occurs.
If anyone knows what could be causing this, it would be very helpful :)
Polarian
https://wiki.archlinux.org/title/USB_flash_installation_medium#In_Windows
Note that balena etcher is not mentioned, but rufus is listed (as 4th
choice) with a purple tipbox .
Try following that tipbox or use of the other listed choices (preferably
starting with the first ...)
LW
