Re: PKGBUILD - clamav 0.103.4 - source .tar.gz downloads fine, .tar.gz.sig is 403? (same with Arch package)

[Ralf Mardorf via arch-general <arch-general@xxxxxxxxxxxxxxxxxxx>]

On Sun, 21 Nov 2021 14:06:53 +0000, u34--- wrote:
>Ralf Mardorf via arch-general <arch-general@xxxxxxxxxxxxxxxxxxx> wrote:
>> On Sun, 21 Nov 2021 13:35:20 +0100, Guus Snijders wrote:  
>> >Op zo 21 nov. 2021 12:35 schreef Ralf Mardorf:  
>> >> at the moment I don't know how to override the nameserver assigned
>> >> by the O2 HomeBox 6641. Some information claims that it is
>> >> impossible.   
>> >
>> >As long as you control the host itself, this shouldn't be too big a
>> >problem. DHCP is convenient, not obligatory.
>> >
>> >Worst case: edit /etc/resolv.conv directly.  
>> 
>> do you think of PPPoE pass-through or something else?  
>
>My understanding to his suggestion is to start with
>
>    nameserver 8.8.8.8
>    nameserver 8.8.4.4
>
>in /etc/resolv.conf. Just those 2 lines.

Hi,

the connection with the O2 HomeBox 6641 is done by

     nameserver 192.168.1.1

the O2 HomeBox 6641 then does use an O2 nameserver.
It's a long time ago that I used PPP [1], I even don't remember, if I've
ever used it with this router. However, when neither using DHCP nor
PPPoE pass-through, how do I connect with the router?

Regards,
Ralf

[1]
[rocketmouse@archlinux ~]$ /bin/ls -hAl /etc/ppp/peers/
total 4.0K
-rw-r--r-- 1 root root 98 Feb 18  2013 alice
lrwxrwxrwx 1 root root 20 Apr 22  2015 provider -> /etc/ppp/peers/alice
[rocketmouse@archlinux ~]$ head -2 /etc/ppp/peers/alice
plugin rp-pppoe.so
enp3s0
[rocketmouse@archlinux ~]$ /bin/ls -hAl /usr/local/sbin/alice*
-rwxr-xr-x 1 root root 2.1K Apr 13  2016 /usr/local/sbin/alice
-rwxr-xr-x 1 root root 1.8K Apr 13  2016 /usr/local/sbin/alice-dhcp
[rocketmouse@archlinux ~]$ grep pppoe_on\( -A12 /usr/local/sbin/alice
pppoe_on() {
  if [ "$(pidof pppd)" ]; then
    printf "\nError: An instance of pppd is already running.\n\n"; exit 1
  else
    echo ; modprobe -v pppoe; ip link set enp3s0 up
    d=""
    if [ ! "$(grep Arch /etc/issue)" ]; then
      d="dsl-provider"
    fi
    pon $d
    printf "\nEstablishing the connection might take a while.\n\n"
  fi
}


That's how I establish an Internet connection nowadays:

[rocketmouse@archlinux ~]$ grep dhcpcd_on\( -A2 /usr/local/sbin/alice-dhcp 
dhcpcd_on() {
  echo ; dhcpcd $(basename $(ls -d /sys/class/net/enp?s0)) ; echo
}