On Fri, Oct 1, 2021 at 2:24 AM Adriel Cardenas via arch-general < arch-general@xxxxxxxxxxxxxxxxxxx> wrote: > Hi everyone, > > I am trying to set up a MFP 125a (all in one HP device), and usually > just installing CUPS + HPLIP detects and configure this kind of devices, > however in this case I am able to use the printer but not the scanner. > The printer it is detected correctly and works fine, but keep getting an > I/O error whenever I try to use the scanner. > > The device is recognized by lsusb like: > > Bus 001 Device 005: ID 03F0:222a HP, Inc LaserJet Pro MFP M125nw > > And scanimage -L and sane-find-scanner recognize it like: > > device `hpaio:/usb/HP_LaserJet_Pro_MFP_M125a?serial=CNB6F0568K' is a > Hewlett-Packard HP_LaserJet_Pro_MFP_M125a all-in-one > > found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x222a [HP > LaserJet Pro MFP M125a]) at libusb:001:005 > > Doing a little research got here: > > https://evilshit.wordpress.com/2012/09/23/how-to-install-and-configure-hp-printers-scanners-on-arch-linux/ > where indicates that uncommenting the #hpaio line in the > /etc/sane.d/dll.conf would help, but it doesnt have that line :( > > Does anyone have seen something like this? any good tips or links for > settiing this AIO device? > > uname -a: Linux archlinux 5.10.69-1-lts #1 SMP Sun, 26 Sep 2021 12:30:37 > +0000 x86_64 GNU/LinuxP Have you tried setting up the printer and scanner with driverless printing and scanning? I have an HP printer, and setting it up driverless means there is no need to use the HPLIP package at all and it sets up a single ppd file, and works well in general. Although I don't have a scanner the arch wiki has advice on setting up driverless scanning too at https://wiki.archlinux.org/title/SANE#Installation That may lead to a solution? -- mike c
