On 05.06.21 10:05, das via arch-general wrote:
Dear Friends
When I am connecting my machine to the camera with an USB-micro-USB cable,
system is showing it all right with 'lsusb':
...
Bus 001 Device 005: ID 04b0:0445 Nikon Corp. NIKON DSC D3500
...
The relevant part from 'usb-devices' too I am quoting here:
...
T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#= 5 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=04b0 ProdID=0445 Rev=01.00
S: Manufacturer=NIKON
S: Product=NIKON DSC D3500
S: SerialNumber=0000005508485
C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=2mA
I: If#=0x0 Alt= 0 #EPs= 3 Cls=06(still) Sub=01 Prot=01 Driver=(none)
...
Is your camera setup as "Mass storage" under "Setup menu", "USB"?
At least my older camera works fine with this setting under (Arch)-Linux.
Here are the dmsg i get:
usb 1-1.1: new high-speed USB device number 7 using xhci_hcd
usb 1-1.1: New USB device found, idVendor=04b0, idProduct=0419,
bcdDevice= 1.11
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1: Product: NIKON DSC D300
usb 1-1.1: Manufacturer: NIKON
usb 1-1.1: SerialNumber: xxxxxxxxxxxx
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host0: usb-storage 1-1.1:1.0
RPf
