On 07/12/2017 10:29 PM, mick howe via arch-general wrote:
On 13 July 2017 at 01:17, Mrrob <rob@xxxxxxxxxx> wrote:
On 13/07/17 07:09, mick howe via arch-general wrote:
I've just changed ISP and I can't get the changed configuration to stick.
I'm using 'static IP address - manual assignment' from Network
configuration wiki page.
I need to change my address from 192.168.1.0/24 to 192.168.20.1/24.
using iproute2 tools as per wiki I can get everything working UNTIL I
reboot, at which time some of the settings show the old values and others
the new.
I've been manually configuring these settings without problems since I
started using linux in 1994.
I assume that (as well as changing ISPs) you have changed your router and
it has a different internal range to the old one.
Correct, and the ISP failed to include modem password in the box.
If you have an IP address automatically after booting then something is
bringing up the network automatically. Assuming your Arch install is newer
than 2013 then I would expect you've configured netctl to manage the
interface.
I had to reinstal when I moved in April 2013, would have used the simplest
manual method
Look in /etc/netctl
[mick@cave ~]$ ls -aR /etc/netctl/etc/netctl:
. .. examples hooks interfaces
/etc/netctl/examples:
. ethernet-static tunnel wireless-wpa
.. macvlan-dhcp tuntap wireless-wpa-config
bonding macvlan-static vlan-dhcp wireless-wpa-configsection
bridge mobile_ppp vlan-static wireless-wpa-static
ethernet-custom openvswitch wireless-open
ethernet-dhcp
pppoe
wireless-wep
/etc/netctl/hooks:
. ..
/etc/netctl/interfaces:
. ..
and
$ systemctl list-unit-files --state=enabled
[mick@cave ~]$ systemctl list-unit-files --state=enabled
UNIT FILE STATE
org.cups.cupsd.path enabled
autovt@.service enabled
dbus-org.freedesktop.network1.service enabled
dbus-org.freedesktop.resolve1.service enabled
display-manager.service enabled
getty@.service enabled
httpd.service enabled
lxdm.service enabled
nmbd.service enabled
openntpd.service enabled
org.cups.cupsd.service enabled
postgresql.service enabled
smbd.service enabled
systemd-networkd.service enabled
systemd-resolved.service enabled
org.cups.cupsd.socket enabled
systemd-networkd.socket enabled
remote-fs.target enabled
18 unit files listed.
lines 1-21
is blahbluhblahnetwork1.service the guilty party or is it
systemd-networkd.service?
what am I looking for in these?
This is the wiki page for the network manager you are using:
systemd-networkd https://wiki.archlinux.org/index.php/Systemd-networkd
--Rich
